ACFL-6211U-060E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ACFL-6211U-060E optoisolator is a type of isolator used in electrical circuits popularly known as a logic output isolator. Isolators are components that ensure electrical signals are isolated from each other, providing insulation from external electrical noise and direct current. In some applications, galvanic isolation prevents the transmission of power whereas in others, the transmission of data signals is prevented. The ACFL-6211U-060E is an isolation component with a logic output.

The typical application field of the ACFL-6211U-060E is for digital signal communications such as serial communication and control systems. The optoisolator is designed to electrically isolate signals between a signal source and a receiver from a noise source, while still providing isolation and protection to the signal. This is often used in data transmission systems, where noise or electromagnets can interfere with the signal, causing errors in the data. The ACFL-6211U-060E is also used for remote sensing in applications where long conductive wires need to be connected for obtaining the reading from a control panel or instrumentation.

The major component of the ACFL-6211U-060E is an infrared emitting diode which emits light to an NPN phototransistor, mounted side-by-side on a lead frame. The NPN transistor then amplifies the signal and drives it to the output stage. The output stage of the optoisolator provides a logic output which can be used for digital communication and control systems. The output stage of the optoisolator is designed to provide a digital low-power, high-speed, logic-conditioned output signal.

The ACFL-6211U-060E is designed to operate over a wide temperature range from -20°C to +105°C. The optoisolator is also designed to provide a high-speed switching response time of less than 10µsec, so it can be used in high-speed applications. The optoisolator is also designed to provide a low power dissipation (1000mW typical and 1500mW maximum), so it can be used in battery powered systems.

The ACFL-6211U-060E optoisolator also provides a high level of electrical noise immunity for the connected line. This is due to its TTL compatible receiver with an input operational current up to 10mA. The receiver also has a high common mode transient immunity of > 30kV/us. This ensures that the optoisolator will be reliable in applications where high levels of electrical noise can be expected.

In summary, the ACFL-6211U-060E optoisolator is a type of isolator for electrical circuits and it is used in digital signal communications, remote sensing, and control systems. The optoisolator is designed to provide isolation from external electrical noise and direct current. The optoisolator also provides a logic output which can be used for digital communication and control systems with a low power dissipation and a high speed response time. Additionally, the ACFL-6211U-060E optoisolator provides a high level of electrical noise immunity for the connected line. This ensures that the optoisolator will be reliable even in high-noise applications.

The specific data is subject to PDF, and the above content is for reference