HCPL-7710#360

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HCPL-7710#360 is an optoisolator which is used as an integrated circuit in many applications. It is part of the Optoisolators – Logic Output family of integrated circuits.

This optoisolator operates on common source logic levels and can switch between them with a wide range of input voltages. It provides an isolated output for driving relays, LEDs and other devices which may require high voltage or current. This optoisolator can also be used in 3.3V and 5V logic levels, allowing for even more flexibility when it comes to applications.

The most important feature of the HCPL-7710#360 is the low input current requirement. It only requires as little as 1 µA for the logic level input. This means that it can be powered by low cost and low power source devices, allowing it to be used in many different systems and applications.

The HCPL-7710#360 has a maximum transfer efficiency of 95%. This means that it can be used with an even lower energy consumption compared to other optoisolators. The output of the HCPL-7710#360 has a voltage drop of 1.2 volts across the positive and negative pins when it is operating at 10 mA. This output voltage drop can be reduced when the current is increased.

The HCPL-7710#360 optoisolator also has an extended operating temperature range. It is designed to operate at temperatures ranging from -40 °C to +125 °C. This range allows for a wide variety of applications in extreme environmental conditions.

The HCPL-7710#360 optoisolator uses a phototransistor to achieve its transfer function. This phototransistor is connected to the logic level input and the output. The logic level input is then connected to the photoemitter which produces light when electricity is passed through it. The light is then picked up by the photo transistor which triggers the output.

The output of the HCPL-7710#360 optoisolator can also be used as a reference point for other logic. This means that the voltage level can be compared to other devices or signals. This makes it useful in applications where multiple systems or logic must be verified before operations can commence.

The HCPL-7710#360 optoisolator is suitable for applications such as interfacing and isolating 3.3V and 5V logic for the drive of LEDs, relays, and other output devices which require high voltage or current. It is also suitable for applications which require extended temperature range and a low input current requirement.

The specific data is subject to PDF, and the above content is for reference