HCPL-814-W0AE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HCPL-814-W0AE optoisolator is a transistor output, photovoltaic device. It is an essential component in a variety of industrial, commercial, and military applications. In particular, it is widely used in safety-critical systems such as lighting and surveillance systems, instruments, computers, and automotive applications.

An optoisolator is an electronic device that can be used to isolate electrical signals and circuits from each other. It works by sending electromagnetic radiation across an electrical gap, typically an air gap. This radiation is converted into an electrical signal on the other side of the gap. The two sides of the gap are isolated from each other by the radiation and thus the electrical signals cannot cross between them.

The HCPL-814-W0AE optoisolator consists of two main parts: a light-emitting diode (LED) and a phototransistor. The LED is a semiconductor device that emits light when current passes through it. The phototransistor is another semiconductor device that converts the light emitted by the LED into an electrical signal. The two components are connected together so that the electrical signal generated by the phototransistor is proportional to the amount of light emitted by the LED.

This diode/transistor combination is the basic building block of optoisolator circuits. The output of the HCPL-814-W0AE optoisolator is an electrical signal with very high isolation. It provides excellent noise immunity and high speed operation, even in high temperature environments. The optoisolator also has a wide operating temperature range.

In operation, the HCPL-814-W0AE optoisolator receives an input signal from a controller circuit in the form of a voltage or a current. The electrical signal is converted into light pulses by the LED and this light enters the phototransistor, which converts the light pulses back into an electrical signal. The electrical signal is then sent to the output of the optoisolator in the form of an isolated voltage or current signal.

The HCPL-814-W0AE optoisolator is a simple yet reliable device that is used in a wide range of electrical applications. It is particularly useful in safety-critical systems and instruments, allowing for electrical signals to be isolated from one another for optimum safety. It is also used in computers, lighting systems, diagnostic equipment, and automotive applications.

The specific data is subject to PDF, and the above content is for reference