SE-330-25-00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Protection Relays & Systems are electric devices that are in place to ensure the reliability of electrical power systems. They are designed to detect any abnormalities and then initiate corrective action. The SE-330-25-00 Protection Relay is one such device and is used to trip and close optional circuits in order to guard against electrical overloads, short circuits and other power system faults.

The SE-330-25-00 is a dual-phase sensing relay. It has two inputs (A & B) and each input has two sensing elements. When a specific voltage or current condition is detected on either input, the relay will activate. When the voltage or current ranges of each input exceed the operating or trip levels, the relay will trigger the alarm. Depending on the circuit design, the relay may also open or close, depending on the fault occurrence.

The SE-330-25-00 is typically used in large-scale industrial and commercial power systems. It is most commonly used in tandem with other protective relays to provide a complete system protection solution. By using an array of relays in conjunction with one another, multiple levels of protection can be implemented - from power system reset by opening break contacts to monitoring overloads to instantly shut off circuits.

The SE-330-25-00 provides both automatic and manual control over the circuit operation. The relay includes an in-built adjustable timer, which can be programmed to meet the requirements of the application. Through the timer, the user can manually control the circuit operations, allowing for the switch from trip to close mode or vice versa, as required. As the relay is adjustable, users are able to tailor the performance to their specific requirements.

In addition to providing manual control, the SE-330-25-00 also has a built-in expert system that can be programmed to automatically control the circuit parameters. Through this expert system, the user can create a customized operation sequence that will evaluate conditions in the circuit and then take the appropriate action. The expert system can also be used to deliver diagnostic information to the user.

When it comes to installation and maintenance, the SE-330-25-00 Protection Relay is relatively straightforward. The unit requires three-phase, 220V, 15A electrical connection. It should be mounted to a flat surface and can be connected to the system electrical bus using either simple clamps or terminals.

The SE-330-25-00 is one of the most widely used protective relays, and is known for its reliability and accuracy. With its combination of manual and automatic control, the SE-330-25-00 provides a comprehensive, user-friendly protection solution that can ensure the safety and dependability of power systems.

The specific data is subject to PDF, and the above content is for reference