Allicdata Part #: | 1864-1123-ND |
Manufacturer Part#: |
DUB01CD48500V |
Price: | $ 136.52 |
Product Category: | Industrial Controls |
Manufacturer: | Carlo Gavazzi Inc. |
Short Description: | RELAY MONITOR VOLT 2-500V |
More Detail: | N/A |
DataSheet: | DUB01CD48500V Datasheet/PDF |
Quantity: | 50 |
1 +: | $ 124.11000 |
Series: | DUB01 |
Part Status: | Active |
Type: | Voltage Sensing AC/DC |
Trip Status: | Energized, Latching High/Low |
Trip Range: | 2 ~ 500V AC/DC |
Delay Time: | 0.1 Sec ~ 30 Sec |
Voltage - Supply: | 24 ~ 48VAC/DC |
Output Type: | Relay |
Circuit: | SPDT (1 Form C) |
Contact Rating @ Voltage: | 8A @ 250VAC |
Mounting Type: | DIN Rail |
Operating Temperature: | -20°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The DUB01CD48500V current/voltage relay output is used in both monitor and application fields. This device can be used to measure both current and voltage. It is equipped with a solid-state relay (SSR) output, enabling electrical power to be delivered to a device or circuit, even when the measured current or voltage changes. This versatile device also has an adjustment potentiometer, used to adjust current tripping thresholds, or to set the trigger accuracy and acceptable range for voltage measurements.
In a monitor field, the DUB01CD48500V can be used to detect current or voltage changes on a motor, pump, or other industrial equipment. The device’s SSR output can then be used to cut the power if the current or voltage exceeds the set threshold. This device can also be used as an alarm, providing an early warning of potential equipment malfunctions before they can cause damage.
In applications field, the DUB01CD48500V can be used to control the operation of a motor or other industrial equipment. The device’s SSR output can be used to deliver power to the motor or equipment based on changes in current or voltage detections. For example, the device can detect when a motor is about to overload and cut off power to prevent damage, or the device can detect when a pump has stopped and start the pump automatically.
The DUB01CD48500V is powered by a DC power supply, ranging from 12 to 24VDC. It is designed to work with a 4-20mA current range or a 0-10V voltage range. The device can be adjusted to detect changes over a range of 0.1-90% of the range selected. The solid-state relay output can deliver up to 10A of continuous current, and up to 250A of intermittent current.
The DUB01CD48500V current/voltage relay output is a versatile device with a wide range of uses in both monitor and application fields. It can be used to detect current or voltage changes on a motor, pump, or other industrial equipment. It can also be used to control the operation of a motor or other industrial equipment. With its adjustable potentiometer and solid-state relay output, this device is capable of delivering electrical power even when the measured current or voltage changes.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
DUB03CW24 | Carlo Gavazz... | 0.0 $ | 1000 | RLY OVER/UNDER VOLTAGE |
DUB01CD48500V | Carlo Gavazz... | 136.52 $ | 50 | RELAY MONITOR VOLT 2-500V |
DUB01CB23500V | Carlo Gavazz... | 139.29 $ | 49 | RELAY MONITOR VOLT 2-500V |
DUB02CT23 | Carlo Gavazz... | 128.21 $ | 4 | OVER/UNDER VOLTAGE RELAY |
CURRENT SWITCH 5-50A
21-890=WILMAR POWER MONITOR
RELAY CUR SENSE 24VDC 5-5A
REL AC GROUND FAULT SENS 120VAC
3-PHASE OVER/UNDER VOLT RLY
TACH RLY 300 RPM 115V