SRU5028-4R7Y Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, such as the SRU5028-4R7Y, are a type of passive components used in many electronic circuits for a variety of purposes. They are composed of two or more conductor coils, depending on the design of the device. In many cases, these components are used in the power supply and signal line sections of electronic devices. In a PCB, the inductor is typically connected between the power supply and ground plane. The inductor is often used to suppress undesirable noise that is caused by power supply ripple and AC line noise, which is picked up by the PCB and routed to the load circuitry. The inductor also helps reduce the power consumption of a device by providing a smooth current flow, reducing the amount of energy lost to heat due to voltage conversion.

The SRU5028-4R7Y is an inductor made by Murata Manufacturing Co., Ltd. It is a 10mm-diameter, 4.7µH shielded, radial-lead, PCB-mountable inductor designed for use in high-frequency applications. It features a low DC resistance and minimal temperature shift over the operating range. The inductor features a ferrite core material that has high permeability for low power loss, and its small size is ideal for high-density mounting. The SRU5028-4R7Y is rated for a maximum current rating of 670mA.

The primary application of the SRU5028-4R7Y is in the filtering of high-frequency signals. It can be used to filter out noise that is generated in the power supply, or reduce the impact of AC line noise on the power supply. The inductor can also be used to reduce the impact of supply voltage spikes on other components in a given circuit. In addition, the SRU5028-4R7Y can be used to reduce the amount of current drawn by a circuit, thereby reducing its power consumption. Lastly, the inductor can be used to reduce the frequency of high-frequency signals in order to reduce the number of components required for a circuit.

The working principle of the SRU5028-4R7Y is based on the fundamentals of electromagnetic induction. When an alternating current (AC) is applied to the inductor, a magnetic field is created that induces an electrical current in a second wire. The magnitude of the induced current is dependent on the magnitude of the original AC current and the number of turns of the coil in the inductor. In the inductor, the voltage is delayed by a number of milliseconds, depending on the inductance of the coils. This delay is used to filter out high-frequency noise, as it passes through the inductor, thereby reducing the amount of high-frequency signal that passes through the circuit.

In conclusion, the SRU5028-4R7Y inductor is a highly versatile component commonly used in a variety of different applications. It is an ideal choice for filtering high-frequency noises in power supplies, reducing the amount of current draw in circuits, and reducing the number of components required in a given circuit. It works on the principle of electromagnetic induction and can be used in various circuits to provide the desired results.

The specific data is subject to PDF, and the above content is for reference