493S-1073A=P3 Filters |
|
Allicdata Part #: | TKS5453TR-ND |
Manufacturer Part#: |
493S-1073A=P3 |
Price: | $ 3.11 |
Product Category: | Filters |
Manufacturer: | Toko America Inc. |
Short Description: | FILTER HELICAL 452MHZ TYPE 5CHT |
More Detail: | N/A |
DataSheet: | 493S-1073A=P3 Datasheet/PDF |
Quantity: | 1500 |
750 +: | $ 2.82068 |
1500 +: | $ 2.76311 |
Series: | 5CHT |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Frequency - Center: | 452MHz |
Bandwidth: | 10MHz |
Selectivity: | 27dB (+50MHz) 27dB (-50MHz) |
Ripple: | 0.5dB |
Insertion Loss: | 4.5dB |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
The 493S-1073A=P3 helical filter is a type of radio frequency (RF) filter made up of coils of increasingly larger radius, connected by sections of decreasing radius. The 493S-1073A=P3 helical filter is used in a variety of radio frequency systems and applications. This helical filter provides high attenuation and extremely low attenuation ripple in the designated frequency band.
Applications
The 493S-1073A=P3 helical filter is typically used as an RF filter or a bandpass filter in various radio frequency systems and applications. It is designed to filter out any signals in the designated frequency range, thereby eliminating interference and noise from other signals. Applications of helical filters include radio receivers, radio transmitters, RADAR systems, and satellite communication systems.
Working Principle
The working principle of a helical filter is based on the distributed capacitance of its helical coils, or radiators, which act together as a filter. The distributed capacitance of the helical coils helps in filtering out any unwanted signals in the designated frequency range. The helical filters have a relatively wide passband, high attenuation and low attenuation ripple. This allows them to be used to provide precise and high-quality filtering solutions.
Conclusion
The 493S-1073A=P3 helical filter is a type of RF filter made up of a series of helical coils, connected by sections of decreasing radius. It is widely used as an RF filter or a bandpass filter in various radio frequency systems and applications. This helical filter provides high attenuation and extremely low attenuation ripple in the designated frequency range, thereby eliminating interference and noise from other signals.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
493S3S3S12 | Conxall/Swit... | 35.66 $ | 1000 | SPLIT FMALE-FMALE/FMALE 3... |
FILTER HELICAL 820MHZ TYPE 5HW
FILTER HELICAL 1010MHZ TYPE 5HW
FILTER HELICAL 216MHZ TYPE CBW
FILTER HELICAL 735MHZ TYPE 5HT
FILTER HELICAL 830MHZ TYPE 5HT
FILTER HELICAL 655MHZ TYPE 5HT