PSM1F-821M-10T0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The electromagnetic interference (EMI) and radio frequency interference (RFI) filters, such as the PSM1F-821M-10T0, are widely used to protect sensitive electronic components from accidental and man-made interference. The EMI/RFI filters are capacitors, inductors, and resistors combined in either a series or parallel configuration to form an electronic network. The network is designed to reduce the frequency of radio frequency signals and limit the power of electromagnetic interference so that it does not affect the performance of the protected electronic components.

The PSM 1F-821M-10T0 EMI/RFI filter is a high power Common Mode filter designed for use in medium- to high-frequency applications. This particular EMI/RFI filter is intended to be used in applications with frequencies between 1 MHz and 10 GHz. It can be used in a variety of applications including cellular base station equipment, wireless LANs, microwave radios, and even in automotive electronics. It is also suitable for use in medical equipment as it contains both low insertion loss and low return loss, making it a suitable choice for devices that require noise attenuation in the signal path.

In terms of working principle, the PSM 1F-821M-10T0 EMI/RFI filter is designed with two identical LC networks that are placed in parallel with each other. The two LC network components are composed of a capacitor in series with an inductor. The two identical LC networks are connected in series with the signal line, and a resistor is connected in parallel between them. When the signal line is operating at a high frequency, the capacitor will attenuate any high-frequency current and act as a high-pass filter, while the inductor will attenuate any low-frequency currents and act as a low-pass filter. The resistor will dampen any excess high-frequency energy that is not attenuated by the capacitor and inductor.

This arrangement of the two LC networks and the resistor forms the basis of the PSM 1F-821M-10T0\'s effective EMI/RFI filter. When the device is placed between the power source and the electronic component, it will provide a barrier against any man-made or environmental interference by reducing the amplitude of the interfering frequency, while also preventing the interference signal from entering the electronic component.

In conclusion, the PSM 1F-821M-10T0 is a reliable EMI/RFI filter designed for medium- to high-frequency applications such as cellular base station equipment, wireless LANs, and microwave radios. The device is composed of two identical LC networks connected in parallel with a resistor and is designed to reduce the amplitude of the interfering frequency, while also limiting the power of the electromagnetic interference to prevent it from affecting the performance of the protected electronic components.

The specific data is subject to PDF, and the above content is for reference