SQM700JB-200K

Series:	SQM
Packaging:	Bulk
Part Status:	Active
Resistance:	200 kOhms
Tolerance:	±5%
Power (Watts):	7W
Composition:	Ceramic
Features:	Anti-Arc, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.512" L x 0.354" W (13.00mm x 9.00mm)
Height - Seated (Max):	1.594" (40.50mm)
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are components that, as the name implies, are used to reduce or block the flow of electrical current in a circuit. These resistors are also commonly referred to as “fixed” resistors because once they are soldered into place, they remain in that state until they are changed. Through hole resistors are widely used in many applications, particularly electronics and associated circuitry. One typical type of through hole resistor is the SQM700JB-200K, which is widely used in industrial and consumer applications.

SQM700JB-200K Application Fields

The SQM700JB-200K is a fixed type of through hole resistor. This type of resistor is manufactured in several sizes, from 0.25 watts up to 10 watts. This allows it to be used in a variety of applications and circuitry where different levels of power are required.One common application for the SQM700JB-200K is in automotive electronics. This resistor is often used in combination with a voltage regulator to protect sensitive electronic components from excessive voltage that could damage the system. It is also used in computer parts, such as video cards, where it is combined with capacitors and other resistors to reduce the voltage to a specified level.In consumer electronics, such as home theaters, the SQM700JB-200K can be used to manage the flow of current in meters and resistors. The SQM700JB-200K is often found in modern audio equipment such as amplifiers and speakers, where it is used as a decoupling resistor. This type of resistor is also found in digital cameras, where it is used to reduce the amount of current flow to the sensor.

SQM700JB-200K Working Principle

TheSQM700JB-200K is a fixed resistor, which means that once it is soldered into place, it remains in that state until it is changed. It is composed of two components: a resistor and a dielectric material. The resistor itself is composed of a resistive material such as wire, carbon or metal oxide that has a specified resistance value. The dielectric material is made from a type of insulating material with a low resistance value such as porcelain, glass, mica, or other ceramic materials, which also helps to dissipate heat.When voltage is applied to the resistor, current flows through it. This current is proportional to the voltage across the resistor (Ohm’s Law). The resistive material will convert this energy into heat as it passes through the resistor. This heat is then dissipated through the dielectric material. The resistance value of the resistor will affect the amount of current passed, thus allowing the user to precisely control the amount of current flowing through the circuit.

Conclusion

Through hole resistors such as the SQM700JB-200K are widely used in many types of electronic circuits and systems. These resistors are composed of a resistive material and dielectric material which allow them to reduce or block the current flow. They are also rated in power and size, allowing them to be used in different applications and systems. The SQM700JB-200K is typically used in automotive electronics, consumer electronics, audio equipment, digital cameras and other similar applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description