F-DA50C Allicdata Electronics
Allicdata Part #:

F-DA50C-ND

Manufacturer Part#:

F-DA50C

Price: $ 7.58
Product Category:

Power Supplies - External/Internal (Off-Board)

Manufacturer: Cosel USA, Inc.
Short Description: HEATSINK FOR DAS/DPA POWER SUPP
More Detail: N/A
DataSheet: F-DA50C datasheetF-DA50C Datasheet/PDF
Quantity: 1000
1 +: $ 6.89220
Stock 1000Can Ship Immediately
$ 7.58
Specifications
Series: --
Part Status: Active
Accessory Type: Heat Sink
For Use With/Related Products: DAS, DPA Series Power Supplies
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
The F-DA50C is an essential accessory for industrial electronic systems. Its primary purpose is to detect and monitor shifts in an electrical current for its applications, making it possible to detect abnormalities in the system, such as spikes, noise, or power loss. In this article, readers will be presented with a comprehensive overview of the F-DA50C application field and working principle, giving them a better understanding of how it works and how they can benefit from its use.
 
Application Field and Working Principle
The F-DA50C is a device used to monitor a continuous electrical current for its applications, and the detection of any unexpected changes. It is designed to detect even small fluctuations in current, such as a small spike in current or an alternating or fluctuating noise. This allows users to detect abnormalities in the electrical system at an early stage and make the necessary adjustments.
 
The F-DA50C has two primary components: the modulating unit and the transducer. The modulating unit comprises a differentiator and amplifier that restrict the signal bandwidth to just the correct range. The differentiator converts the input current into a voltage signal, while the amplifier amplifies the signal. The transducer then takes the voltage signal and converts it into a current that is too small to be detected by the human eye. This current is then sent to the output.
 
The F-DA50C allows users to detect and monitor the condition of the switch. This can help to detect electrical noise or other forms of interference that may be occurring in the system. It can also be used to monitor the temperature of a circuit and the current level of the circuit, allowing users to prevent overheating and overcurrent conditions. In addition, the F-DA50C can be used to detect vibration or monitor resonance frequency in industrial equipment.
 
The F-DA50C is an invaluable accessory for any industrial environment as it can help to ensure systems are functioning optimally. The device is easy to install and requires no calibration, making it a cost-effective solution.
 
Conclusion
The F-DA50C is an important accessory for industrial electronic systems. It can detect and monitor changes in an electrical current, making it possible to detect abnormalities in the system at an early stage, such as spikes, noise, or power loss. The device is also easy to install and requires no calibration, making it a cost-effective solution for any industrial environment.
 

The specific data is subject to PDF, and the above content is for reference

Latest Products
700DNC40-CON-KIT-9G

CONNECTOR KIT FOR 700DNC PWR SUP

700DNC40-CON-KIT-9G Allicdata Electronics
09-160CFG

COVER W/ FAN FOR CONDOR GPFC160

09-160CFG Allicdata Electronics
73-548-001

CONNECTOR FOR DS1800/DS2000

73-548-001 Allicdata Electronics
F-DA50C

HEATSINK FOR DAS/DPA POWER SUPP

F-DA50C Allicdata Electronics
CU20 LOOM KIT

WIRE HARNESS FOR CU20 SER POWER

CU20 LOOM KIT Allicdata Electronics
VRA.00334.0

EVAL BOARD FOR PET800-12-074NA

VRA.00334.0 Allicdata Electronics