Allicdata Part #: | VE-J6X-EZ-F4-ND |
Manufacturer Part#: |
VE-J6X-EZ-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.2V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.2V 4... |
DataSheet: | VE-J6X-EZ-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VE-J00™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 200V |
Voltage - Input (Max): | 400V |
Voltage - Output 1: | 5.2V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 4.81A |
Power (Watts): | 25W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, SCP |
Operating Temperature: | -10°C ~ 100°C |
Efficiency: | 88% |
Mounting Type: | Through Hole |
Package / Case: | Half Brick |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Base Part Number: | VE-J6X |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are indispensable components for modern power electronics, providing a crucial connection between the direct current and alternating current power sources. The VE-J6X-EZ-F4 is one such device, offering tremendous versatility and reliable performance in a variety of applications. This article will discuss the specific characteristics and working principles of the VE-J6X-EZ-F4, as well as the various ways it can be used.
The VE-J6X-EZ-F4 is an efficient, full-bridge dc-dc converter designed for use in a wide range of industrial, commercial, and residential applications. Its design combines two N-channel MOSFETs, four auxiliary circuits and a power operational amplifier to form a convenient, low-cost solution for DC-DC conversion. It is capable of regulating and transforming the output voltage from 0 to 5V, with a continuous current of 10A and a peak current of 20A. This makes it ideal for use in applications where precise output voltage control and power efficiency are required.
Additionally, the VE-J6X-EZ-F4 is designed with a unique two-stage regulation circuit, consisting of a fully-adjustable frequency pulse width modulation (PWM) controller and an adjustable current sensing circuit. This two-stage circuit configuration enables the device to accurately adjust the output voltage and current in a wide range of input voltages and load conditions. As a result, it can maintain very high power conversion efficiency, even under heavy load conditions.
The working principle of the VE-J6X-EZ-F4 is rather simple. The device is connected to the input power source through two positive and negative pins. The input voltage is then set and regulated by the PWM controller, and the current sensing circuit monitors the output current. When the current exceeds the preset value, the PWM controller starts to turn off the gate circuit, reducing the bridge voltage. This then reduces the output voltage and current to the desired level.
In summary, the VE-J6X-EZ-F4 is an ideal choice for DC-DC conversion in a wide range of applications. It offers a reliable, efficient, and easily adjustable solution for regulating and transforming the output voltage from 0 to 5V, with continuous current of 10A and peak current of 20A. Its two-stage regulation circuit ensures highly efficient power conversion and accuracy in a wide range of input and load conditions.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...