BUT92

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BUT92 belongs to the family of single transistors, Bipolar Junction Transistors (BJT). These transistors are used when a larger current and voltage gain is needed. It is a control type transistor with three elements; the collector/source, the emitter and the collector. The BUT92 can be used in a variety of applications, such as amplifying a signal, switching, switching with current gain and others.

Application fields

The BUT92 can be used in various application fields, ranging from motor vehicle electronics to audio amplifiers. In motor vehicle electronics, it is primarily used as an amplifier and for switching purposes. As for audio amplifiers, it can be used for pre-amplification and power amplification stages. In addition, it can be used in high-powered radio transmitters and receivers, power supplies and in power control circuits.

Working Principle

The BUT92 transistor is a three layer device, with an emitter, a base, and a collector. In order for it to work properly, the base must be biased to a DC voltage that is usually smaller than the collector voltage. When the current is amplified by the base, the collector current will increase, allowing it to amplify a signal. The power gain of the transistor depends on the current gain and the voltage gain at the output.

The transistor is also able to provide saturation and cut-off states. In the saturation state, the collector to emitter voltage is extremely small, allowing the current to flow freely. In the cut-off state, the transistor is not conducting, as the base to emitter junction is completely reverse biased. The transition between the two states can be controlled by the base voltage. Using this, the transistor can be used to switch and/or control a load.

In addition, the BUT92 transistor also features a C-E breakdown voltage. This is a voltage which, when reached, will cause the transistor to break down, resulting in a short circuit between the collector and the emitter. This is usually done to prevent damage to the BUT92 transistor and other components in the circuit. This can also be used to protect the transistor from high voltages.

In conclusion, the BUT92 transistor is a versatile device that can be used in a variety of applications, from amplifying a signal to switching and controlling a load. It has a C-E breakdown voltage to protect it from high voltages, as well as a current and voltage gain to allow it to amplify a signal. By understanding the principles of operation, the BUT92 transistor can be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference