ISL28006FH-20EVAL1Z

Series:	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Channels per IC:	1 - Single
Moisture Sensitivity Level (MSL):	--
Amplifier Type:	Current Sense
Output Type:	--
Slew Rate:	0.67 V/µs
Current - Supply (Main IC):	50µA
Voltage - Supply, Single/Dual (±):	--
Board Type:	Fully Populated
Supplied Contents:	Board(s)
Utilized IC / Part:	ISL28006

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ISL28006FH-20EVAL1Z Application Field and Working PrincipleThe ISL28006FH-20EVAL1Z is an evaluation board used to evaluate the performance of a wide range of operational amplifiers. It is designed to allow users to evaluate the characteristics of high-performance, low-offset, low-noise op amps under various conditions.At its core, the ISL28006FH-20EVAL1Z is an operational amplifier. An operational amplifier, more commonly known as an op amp, is an electronic device that can be used to amplify and/or manipulate a signal. It is a direct-coupled, high-gain differential amplifier, designed to operate from a single power supply. An op amp typically consists of a differential input stage, followed by a voltage-gain stage, and finally an output stage.The ISL28006FH-20EVAL1Z incorporates the Intersil Corporation\'s ISL28008FH-20 op amp. This op amp has a high slew rate of 25 volts per microsecond and a typical input offset voltage of less than 1mV. It is capable of providing up to 30 mA of output current and a low typical bias current of 0.2nA. The board features an easy to use push-button control to select the different power supply configurations and to test the various op amp configurations.The ISL28006FH-20EVAL1Z is capable of providing up to 10 MHz of bandwidth and has a wide operating voltage range from ±4V to ±18V. It is also capable of providing optimum linearity with a slew rate of 0.1mV/µs. It is an ideal device for applications requiring high-speed performance, low noise, and high-accuracy thought process.The ISL28006FH-20EVAL1Z is mainly used in automotive electronics, medical electronics, industrial electronics, and communication systems, as well as in the high-speed data acquisition systems. Its balanced gain stage and high slew rate make it an ideal choice for data acquisition systems and test and measurement applications where high speed and accuracy are paramount. Additionally, this board is suitable for use in embedded designs, such as in embedded controller systems where a variety of operational amplifiers are needed.In terms of working principle, the ISL28006FH-20EVAL1Z features a three-stage topology wherein a differential input voltage is applied to the input terminals and the resulting output voltage is processed by the gain stages. The gain stages are configured to produce an amplified output voltage with the main positive and negative rails as the output. The gain stages are designed to provide distortion-free and low-noise performance.To sum up, the ISL28006FH-20EVAL1Z is an evaluation board designed to evaluate the performance of a wide range of operational amplifiers. It is an ideal device for applications requiring high-speed performance, low noise and high accuracy. Additionally, it is suitable for use in embedded designs and can be used in automotive electronics, industrial electronics, and communication systems. Moreover, it has a three-stage topology allowing for distortion-free and low-noise performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description