AIUR-03-270K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components used in a variety of electrical systems, primarily in power supplies. They are designed to transfer electrical energy from one location to another with a minimum of energy loss. The AIUR-03-270K is one such fixed inductor that is specifically designed to drive DC-to-AC converters and other power conversion solutions.

Types of Inductors

The basic type of fixed inductor is the linear-magnetic inductor, which is composed of two coils of wire, one primary and one secondary. The primary is what “injects” the magnetic field into the secondary coil. The secondary coil is wound in a way that the flux is converted to a current, or vice versa, depending on the direction of the current. This type of inductor is commonly used in home electronics because it is relatively inexpensive and simple to manufacture, but has limited power transfer capabilities.

The second type of inductor is the switched-magnetic inductor. This component is composed of several coils, each with its own set of magnetic characteristics. They are usually manufactured with a specific “switch” in order to properly control the direction of the current. This type of inductor is more expensive and complex, but has a higher power transfer rate than linear inductors due to the multiple coil designs. Switched inductors are commonly used in larger power conversion systems, such as commercial power supplies and DC-to-AC converters.

Description of AIUR-03-270K

The AIUR-03-270K is a switched-magnetic inductor designed for DC-to-AC power conversion. It is composed of two coils, a primary and a secondary, with a switch in the center. The switch is designed in such a way that, depending on the position of the switch, it will block, increase or decrease the current in the primary coil to alter the current in the secondary coil. This allows for the efficient transfer of energy from the source to the load, with minimal power loss. The AIUR-03-270K also features a variety of other features such as an active current limiter to prevent overloads, a built-in protection circuit and a safety switch for protection against excessive current.

Working Principle

The AIUR-03-270K works on the principle of magnetic field induction. When an AC voltage is applied to the primary coil, a magnetic field is created by the current flowing through the coil. This magnetic field is then picked up by the secondary coil, inducing a current in the same direction. The direction of the current in the secondary coil can be altered by changing the switch setting of the AIUR-03-270K. This allows for the efficient conversion of DC to AC power.

The limitation of this type of inductor is the amount of power that it can handle without failing, as the switch will fail under excessive current levels. Therefore, the user should take precautions to ensure that the switch does not become overloaded. Also it is important to note that the AIUR-03-270K should not be used in applications where the input or output voltage is excessively high, as this could potentially cause damage to the switch.

Conclusion

The AIUR-03-270K is a switched-magnetic inductor that is specifically designed to drive DC-to-AC converters and other power conversion solutions. It works on the principle of magnetic field induction, and is capable of efficiently transferring power from the source to the load with minimal energy loss. It also features several safety features such as an active current limiter and a safety switch for protection against excessive current. This type of inductor is commonly used in power applications such as commercial power supplies and DC-to-AC converters.

The specific data is subject to PDF, and the above content is for reference