1782-23H

Series:	1782
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Molded
Material - Core:	Iron
Inductance:	1.3µH
Tolerance:	±3%
Current Rating:	535mA
Current - Saturation:	--
Shielding:	Unshielded
DC Resistance (DCR):	220 mOhm Max
Q @ Freq:	25 @ 7.9MHz
Frequency - Self Resonant:	140MHz
Ratings:	--
Operating Temperature:	-55°C ~ 105°C
Inductance Frequency - Test:	7.9MHz
Mounting Type:	Through Hole
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.095" Dia x 0.250" L (2.41mm x 6.35mm)
Height - Seated (Max):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed InductorsThe 1782-23H is a fixed inductor that is widely used in electronics circuits. It is a cylindrical block of material that is mechanically wound to form a coil, then it is installed in a polystyrene epoxy body and sealed. This inductor has a high current capacity and is ideal for use in power supplies, high voltage DC-DC converters, EMI suppression, filter circuits, and other various applications.The primary function of the 1782-23H is to store and control the flow of energy. Inductors are able to do this through the phenomena of inductance, which is the ability of an electrical component to oppose change in electrical current that is passing through it. The value of the inductance is determined by the portion of the coil, where there is an induced magnetic field produced by current flowing through the component. This magnetic field induces a voltage in the inductor which acts to oppose the change of current.In power applications, the 1782-23H is used to reduce the ripple in the output. Ripple is unwanted fluctuations in the power that can cause interference with other components or systems. The inductor acts to smooth the output by introducing a low pass filter. It does this by allowing the low frequency components to pass through relatively unimpeded while opposition to the high frequency components increases as their frequency increases.The 1782-23H is also commonly used in filter circuits. It is used to block out unwanted frequencies while allowing desired frequencies to pass through. This is because the inductance will increase with increasing frequency. This helps to shape and clean the signal, eliminating unwanted components and preserving the desired frequencies.The 1782-23H is also used in EMI (electromagnetic interference) suppression. EMI is produced mainly by high speed digital circuits. In this application, the inductor functions as both a filter and a shielder. It will reduce EMI interference in the power supply, allowing the system to operate correctly without interruption.The 1782-23H is a high quality and reliable component. It is designed for use in a wide variety of applications, from power supplies to filters. Its ability to store and control the flow of energy allows it to be used for power regulation and noise suppression. For the applications mentioned above, the 1782-23H satisfies the requirements of higher frequency and greater power. It is a useful and reliable component for a variety of circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description