1008-182J

Series:	1008
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	--
Material - Core:	Ferrite
Inductance:	1.8µH
Tolerance:	±5%
Current Rating:	457mA
Current - Saturation:	--
Shielding:	Unshielded
DC Resistance (DCR):	720 mOhm Max
Q @ Freq:	30 @ 7.9MHz
Frequency - Self Resonant:	76MHz
Ratings:	--
Operating Temperature:	-55°C ~ 125°C
Inductance Frequency - Test:	7.9MHz
Mounting Type:	Surface Mount
Package / Case:	Nonstandard
Supplier Device Package:	--
Size / Dimension:	0.105" L x 0.095" W (2.66mm x 2.41mm)
Height - Seated (Max):	0.095" (2.41mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed InductorsFixed Inductors are devices which are widely used in the electronic industry, mostly in the field of power electronics. It is used in the areas of signal transduction, power supply, signal detection and stabilization. It acts as a filter, eliminating the noise generated by the fluctuations of current and voltage, and providing stability in the signal path. The 1008-182J is widely used in various applications. It is one of the commonly used small non-polarized inductors in the low frequency range. It is especially useful in the fields of communication and electronic circuits, where its low profile enables high-density applications in limited spaces. The 1008-182J is an inductor with a high resistance-capacitance (RC) ratio, which allows it to withstand extreme temperatures and high frequency environment. Its electrical properties are adjustable, enabling resistive power supplies. Its lowcost and wide tolerances help in providing reliable operation of devices used at the time of their need. In addition to this, it provides high reliability and long life. Its high RF shielding capability helps contain the electromagnetic interference generated by high frequency signals. This RF shield also helps it serve as a low-cost solution for converting DC signals into AC signals. The typical operating voltage of the 1008-182J is up to ten volts, which makes it suitable for use in small power electronic circuits. The working principle of the 1008-182J is based on Faraday’s law of electromagnetic induction. Its core is made up of ferromagnetic material, which helps create an inductance between two terminals when a changing current flows in one or both of the inductors. This flow of current induces a voltage to form at one of the terminals of the inductor. The magnitude of the voltage is proportional to the rate of the change of flux due to the rate of the current flowing through the inductor, as expressed by Faraday’s law. The kernel of the inductor is also responsible for the losses it incurs. Therefore, the core material of the inductor must be chosen carefully. The 1008-182J inductor can also be used as an input filter in power electronic circuits, providing protection against overvoltage and overcurrent. It also acts as a low pass filter, eliminating the high frequency noise coming from the input, and thus providing smooth and continuous current to the circuit. To conclude, the 1008-182J is one of the most versatile, economical, and reliable inductors available in the market, widely used in a variety of applications in the power electronics industry.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description