2510R-54H

Series:	2510R
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	--
Material - Core:	Iron
Inductance:	18µH
Tolerance:	±3%
Current Rating:	106mA
Current - Saturation:	--
Shielding:	Unshielded
DC Resistance (DCR):	4.2 Ohm Max
Q @ Freq:	25 @ 2.5MHz
Frequency - Self Resonant:	21MHz
Ratings:	--
Operating Temperature:	-55°C ~ 105°C
Inductance Frequency - Test:	2.5MHz
Mounting Type:	Surface Mount
Package / Case:	2-SMD
Supplier Device Package:	--
Size / Dimension:	0.255" L x 0.105" W (6.48mm x 2.67mm)
Height - Seated (Max):	0.110" (2.79mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Fixed inductors are by-products of electrical energy conversion and are usually classified into two major categories: fixed inductors and variable inductors. Fixed inductors have a fixed inductance value regardless of the current or frequency of the applied signal. 2510R-54H is one such fixed inductor whose application field and working principle are discussed in this paper.

2510R-54H Application Field

The 2510R-54H is a fixed inductor that can be used in power supplies, electrical filters, and other electrical applications. It can also be used in synchronous rectification circuits and power switching circuits. The application field of 2510R-54H also encompasses motor drives, motor control circuits, and power amplifier circuits. It can also be used in EMI suppression, resonant circuits, and coupling applications.

2510R-54H Working Principle

Fixed inductors principles of operation is based on Faraday\'s law. This law states that a changing magnetic field causes a corresponding electromotive force (EMF) to be induced in a circuit. When a 2510R-54H inductor is placed in a circuit, an EMF will be generated due to the relation between the changing electrical current and the inductor. This principle is known as self-inductance.The inductance of the inductor affects the size of the EMF generated, controlling the amount of current that flows through the inductor. When an initial current initially passes through the 2510R-54H, the inductor will start to store energy in the form of magnetic flux. When the current is interrupted or changed, this stored energy in the magnetic flux will give rise to an opposing EMF. This opposing EMF will cause a decrease in the current and an increase in the voltage across the inductor.This process is known as an inductive reactance, and it is used to control the size of the current in the circuit. By adjusting the size of the inductance, the rate at which the voltage and current fluctuate can be adjusted as well.

Conclusion

The 2510R-54H is a fixed inductor with a wide range of applications. Its working principle is based on Faraday\'s law, and it works by producing a changing magnetic flux that induces a corresponding EMF in the circuit. This EMF can be used to control the size of the current in the circuit. Therefore, the 2510R-54H fixed inductor can be used in a variety of electrical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description