Allicdata Part #: | VS-42HFR160-ND |
Manufacturer Part#: |
VS-42HFR160 |
Price: | $ 6.41 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE GEN PURP 1.6KV 40A DO203AB |
More Detail: | Diode Standard, Reverse Polarity 1600V 40A Chassis... |
DataSheet: | VS-42HFR160 Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 5.76374 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Diode Type: | Standard, Reverse Polarity |
Voltage - DC Reverse (Vr) (Max): | 1600V |
Current - Average Rectified (Io): | 40A |
Voltage - Forward (Vf) (Max) @ If: | 1.5V @ 125A |
Speed: | Standard Recovery >500ns, > 200mA (Io) |
Capacitance @ Vr, F: | -- |
Mounting Type: | Chassis, Stud Mount |
Package / Case: | DO-203AB, DO-5, Stud |
Supplier Device Package: | DO-203AB (DO-5) |
Operating Temperature - Junction: | -65°C ~ 160°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes are electronic components used for switching, or rectifying, AC to DC. There are different types of contain a range of rectifiers from single to bridge and from low to high power. One such type is the VS-42HFR160 full-wave bridge rectifier.
The VS-42HFR160 is a 4-pin full-wave rectifier designed for applications demanding high current/high frequency rectification. It is a versatile device with simple installation, capable of supporting up to 42A peak forward current at a maximum load of 160V and a switching frequency up to 1000kHz, making it suitable for a variety of power rectification applications.
Applications
The VS-42HFR160 full-wave bridge rectifier is suitable for a range of power rectification applications, and is particularly well suited to automotive and industrial applications due to its high current capacity and switching frequency. It can be used for applications such as AC to DC conversion, DC voltage regulation, power supply design, and lighting (among other applications).
Working Principle
The VS-42HFR160 full-wave bridge rectifier is a form of switching bridge that uses four diodes for rectification. When an AC input is applied to the VS-42HFR160, current flows through the diode bridge, switching on the two series of diodes from the positive and negative sides of the bridge in turn. This produces a full-wave rectified output, free of the negative half-cycle of the AC waveform.
The VS-42HFR160 has an internal flyback diode designed to limit the inrush currents that could cause damage to the device when the input voltage is applied. This allows the device to function reliably and safely, even with high-speed switching applications.
The 4-pin design of the VS-42HFR160 means it is easy to install and requires minimal external components. It is designed to reduce the circuit complexity of power rectification applications and make them easier to design and maintain.
Conclusion
The VS-42HFR160 full-wave bridge rectifier is a versatile device that is well-suited for a wide range of high current, high frequency rectification applications. Its 4-pin design and internal flyback diode make it easy to install and maintain, while reduced circuit complexity helps to reduce costs and improve reliability. The VS-42HFR160 is a good choice for automotive and industrial applications as it can handle 42A peak forward current and a switching frequency up to 1000kHz.
The specific data is subject to PDF, and the above content is for reference
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...