Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single

The VS-8S2TH06I-M is a rectifier diode component, the most basic type of diode. Despite the seemingly simple task of being a one-way gate for electricity, rectifier diodes are found in a variety of systems and used for a host of important applications. This article will explain the VS-8S2TH06I-M’s application field and working principle.

Application Field

Rectifier diodes are the simplest of diode circuits and essentially serve as a one-way gate for electric current. By only allowing current to enter a system in one direction, rectifier diodes are extensively used in electrical systems for both AC/DC power conversion and protection against transient spikes. The VS-8S2TH06I-M is designed for use in high-pressure solar photovoltaic installations and infrastructure, which is where its high reverse current capability, wide operating temperature range, and high surge capability are particularly important. Its high-end power rating and bypass diode pairs (8 x 6A) make it an ideal component for such applications.

Working Principle

Rectifier diodes, such as the VS-8S2TH06I-M, works in essentially the same manner as any other diode and is comprised of two semiconductor layers, each with a different band gap. As current passes through the diode it will preferentially favor the layer with the narrower band gap, known as the diode’s “forward state” and will prevent current from passing through in the opposite direction, referred to as the “reverse state”. In the forward state, a rectifier diode will exhibit a low voltage drop and allow current to freely pass through the circuit, whereas in the reverse state, a rectifier diode will block current from passing through and exhibit a higher voltage drop.

In most applications, the VS-8S2TH06I-M is used as a so-called "bridge rectifier", in which two diodes are arranged such that current can pass in either direction as needed. This arrangement eliminates the need for a polarity switch, allowing current to pass through the circuit in both directions. This is useful in applications where the input voltage might fluctuate or frequently switch between A/C and D/C. In the case of the VS-8S2TH06I-M, two sets of the diodes can be used in parallel to enhance current capability.

Conclusion

The VS-8S2TH06I-M is a rectifier diode component designed for high-pressure solar photovoltaic installations and other applications where a high reverse current capability, wide operating temperature range, and high surge capability are required. Its working principle is based on two semiconductor layers with different band gaps, allowing it to only pass current in a single direction while exhibiting a low voltage drop. The diode can also be used as a bridge rectifier, allowing current to pass in either direction as needed.

The specific data is subject to PDF, and the above content is for reference