MSCD70-12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MSCD70-12 rectifier array is a silicon-based rectification device with a very high inrush current capability and a fast response time. The device is composed of four rectifiers arranged in a single-phase bridge configuration. Each rectifier consists of a diode, a gate resistor and a gate-to-source netting inductor. It is designed for use in applications requiring high-current rectification and fast response to surges.

The MSCD70-12 rectifier array is suitable for use in applications such as AC/DC power conversion, electronic ballast and power factor correction (PFC) circuits, as well as high current rectification in AC/DC converters. It is also used in electronic motor drives, inverters, UPS systems and UPS power systems, and current source conversion systems.

The working principle of the MSCD70-12 rectifier array is based on an SCR bridge. When the device is turned on, the controller will set the voltage of each diode to the required voltage level, and the gate of each diode will be activated. This will in turn cause the conduction of current between the anode and gate, resulting in the power transfer from the AC line to the load. The gate resistor connected to each rectifier is responsible for limiting the current within the device.

The MSCD70-12 rectifier array is capable of providing up to 70 amps of inrush current, with a response time of up to 12 microseconds. This high performance device is designed to eliminate up to 99% of the inrush current that is typically seen in conventional rectifiers. The device is very effective in reducing the power dissipation of AC/DC power conversion systems and is rated for operation over a wide range of temperatures.

The MSCD70-12 rectifier array is suitable for use in applications such as AC/DC switching power supplies, motor controllers, inverters, and UPS systems. It is also used in power factor correction (PFC) circuits, where it helps reduce the total harmonic distortion and improve power-factor performance. The device is designed for use in high-current applications, and is capable of providing up to 70 amps of inrush current, with a fast response time.

In conclusion, the MSCD70-12 rectifier array is a high performance, silicon-based rectification device with an extremely fast response time and an inrush current capability of up to 70 amps. It is suitable for use in AC/DC power conversion, electronic ballast and PFC circuits, as well as in other high current rectification applications. The device is highly effective at reducing the power dissipation of AC/DC power conversion systems, and is rated for operation over a wide temperature range.

The specific data is subject to PDF, and the above content is for reference