DF202S-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers

A bridge rectifier is a four-waverectifier system, consisting of four individual diodes which are connected in a bridge circuit configuration. The DF202S-G is a diode bridge rectifier with a maximum repetitive peak reverse voltage of 200V, forward surge current of 50A at 50Hz, maximum RMS voltage of 140V, and a maximum average forward rectified output current of 2A. It is designed to convert AC input voltages into DC output voltages, making it a commonly used component in power systems.

Working Principle

The working of a bridge rectifier is based on the principle of a diode which allows the flow of current in one direction only. When an AC voltage is applied to the bridge rectifier, the voltage alternates between positive and negative. This causes current to flow through the diodes in alternate directions. The resulting output is a pulsating DC voltage. It is important to note that the bridge rectifier output will be higher in amplitude than the input for most applications.

The bridge rectifier contains four diodes arranged in the configuration of a bridge. When the AC voltage is applied to two opposite sides of the bridge, the diode connected to the positive side will become forward biased, and the diode connected to the negative side will become reverse biased. This forward biasing will allow current to pass through the positive diode from anode to cathode. Similarly, in the negative side, the reverse biasing will allow current to pass from cathode to anode, thus completing the circuit and providing a path for the current.

The current flows through the two diodes in opposite directions, resulting in a pulsating DC voltage. During the negative half cycle of the AC voltage, the current will flow through the other two diodes, again in opposite directions. This process is repeated during the whole AC cycle, and the resulting DC voltage will be the sum of all the pulsating voltages. The amplitude of this DC voltage is usually higher than the input AC voltage.

The DF202S-G bridge rectifier is a highly efficient and reliable solution for converting AC voltages into DC voltages. It is commonly used in power electronic applications such as converting AC power from the mains supply into a DC voltage for use in consumer electronics and appliances, for battery charging, and for a variety of industrial applications including automotive electronics and power supplies.

Applications of DF202S-G Bridge Rectifier

The DF202S-G bridge rectifier is typically used in various applications such as power converters, DC motor control, power supplies, and battery chargers. It can also be used in ripple-regulated power systems, voltage regulators, and lighting controls. The maximum output current of 2A, maximum forward surge current of 50A, and maximum repetitive peak reverse voltage of 200Volts, makes the DF202S-G an ideal choice for a variety of applications.

The DF202S-G bridge rectifier is also used in AC-DC LED lighting applications. The LED lights require a constant and accurate DC voltage to operate, and the DF202S-G diode bridge rectifier is able to provide this voltage. It is an efficient and reliable solution for LED lighting applications, and is capable of providing a stable DC output.

The DF202S-G diode bridge rectifier is also used in solar power inverters for converting DC voltage into alternating current for home use. High frequency switching circuit design and power factor correction techniques are used to provide efficient and accurate AC power from DC voltage inputs.

Another application of the DF202S-G diode bridge rectifier is in uninterruptible power supplies (UPS). A UPS system requires precise and stable DC voltage to operate, and the bridge rectifier can provide this. It is also used in automotive applications, such as battery charging and anti-lock brake systems.

Conclusion

The DF202S-G diode bridge rectifier is a highly efficient and reliable solution for converting AC to DC voltages. It has a wide range of applications in power electronics, DC motor control, power supplies, battery chargers, AC-DC LED lighting, solar power inverters, and uninterruptible power supplies (UPS). Its maximum output current of 2A, forward surge current of 50A, and maximum repetitive peak reverse voltage of up to 200V, makes it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference