CCO-083-16.000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are components that generate sinusoidal electrical signals, typically at radio frequency. The CCO-083-16.000 is a crystal controlled oscillator, a type powered by quartz that is specifically designed for providing a stable frequency source. This article will delve into the working principle of the CCO-083-16.000 and its applications.

The CCO-083-16.000 oscillator is capable of generating a frequency up to 16GHz and is constructed of a quartz crystal resonator, a transistor and associated components. The quartz crystal resonator is the key component of the CCO-083-16.000. It is made of two thin plates of quartz cut in a Y shape, and when electric potential is applied to the crystal, it will vibrate at a set frequency. This vibration creates the sinusoidal wave that is the electrical output of the oscillator.

The oscillator works by using a transistor as an amplifier. The transistor receives a small periodic signal from the crystal and amplifies it to create higher power. The amplifier is then fed back to the crystal, so the cycle is repeated, sustaining a constant frequency output. This is known as the active feedback loop and is what ensures the stable output from the CCO-083-16.000.

The CCO-083-16.000 oscillator is designed primarily for use in telecommunications and radio receiver applications. As its output is a sinusoidal wave, it can be used to generate sine waves to be used in transmitter transmitters, receivers and filters. Its accuracy and stability mean it can be used in applications such as phase locked loops, frequency synthesizers, frequency counter and testbench instrumentation.

CCO-083-16.000 oscillators are also used to time-lock multiple radios to a single frequency. By controlling the input signal to the oscillator, radio receivers can be set to a single frequency or multiple frequencies to allow simultaneous transmission over the same channel. The oscillator can also be used to control the frequency of an amplitude modulated (AM) signal. By altering the amplitude of the signal, different modulation levels can be achieved, enabling multiple signals to be sent over a single channel.

Additionally, the CCO-083-16.000 oscillator has applications in computing, as it can be used to generate a periodic clock signal. This signal can be used to control the switching times of electronic components, such as logic gates and microprocessors. The oscillator is also used in the design of high speed analog to digital converters.

In conclusion, the CCO-083-16.000 crystal controlled oscillator is a versatile component that can generate high frequencies and provide stable outputs for a variety of applications. It is used primarily in telecommunications and radio receivers, as well as in computing, to generate clock signals for logic gates and microprocessors.

The specific data is subject to PDF, and the above content is for reference