ASD1-32.000MHZ-EC-T3

Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Height - Seated (Max):	0.039" (1.00mm)
Current - Supply (Disable) (Max):	20µA
Series:	ASD
Packaging:	Tape & Reel (TR)
Part Status:	Active
Base Resonator:	Crystal
Type:	XO (Standard)
Frequency:	32MHz
Function:	Enable/Disable
Output:	HCMOS
Voltage - Supply:	3V
Frequency Stability:	±50ppm
Operating Temperature:	-20°C ~ 70°C
Current - Supply (Max):	6mA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are an electrical circuit used to generate a periodic waveform. Oscillators convert a steady DC input voltage into an AC output voltage. The most common types of oscillators are sinusoidal, square, ramp, and triangular waveform oscillators. One of the most popular types of oscillators is the ASD1-32.000MHZ-EC-T3. This oscillator is used in radio frequency, ultrasound, and other high-frequency applications. It has a wide frequency range from 1Hz to 32MHz and operates at 3.3V and 5V power supply. It has a good temperature stability over -20 to +100 degrees C of ±2 ppm/K.The ASD1-32.000MHZ-EC-T3 oscillator is mainly used to generate precise and accurate high-frequency signals. It is usually used in communication systems, navigation systems, and radar applications. It can also be used in different types of sensors and automobile control systems.The working principle of the ASD1-32.000MHZ-EC-T3 oscillator is based on the Feedback Principle. This principle states that when a signal is fed back to the op-amp, it will produce a sinusoidal waveform. This is because the input and output signals of the op-amp are inversely proportional. The op-amp amplifies the input signal and uses it as feedback to the circuit.This oscillator works by using a signal source, such as an AC voltage source, to drive the amplifier. The output of the amplifier is fed-back to the input of the same amplifier, creating a feedback loop. This creates a positive feedback loop which acts as an oscillator and produces an alternating voltage waveform at the output of the amplifier.The ASD1-32.000MHZ-EC-T3 oscillator is characterized by a high stability, low phase noise, low distortion, high slew rate, and low power consumption. It also has a very wide operating temperature range from -20 to +100 degrees C. This makes it suitable for operations in different environments. In conclusion, the ASD1-32.000MHZ-EC-T3 oscillator is a very versatile and reliable oscillator that can be used in a wide range of applications. Its wide frequency range, high stability, and low power consumption make it an ideal choice for communications, navigation, radar, and sensor applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description