YFF15SC1E472MT000N Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Feed through capacitors, such as the YFF15SC1E472MT000N, are components used in a variety of electronic devices for both signal and power supply filtering. This type of capacitor has both an anode and a cathode they’re connected via an insulated ceramic substrate. The capacitor is inserted into the electrical circuit using two conductive pins, one from the anode and one from the cathode.

The primary purpose of a feed through capacitor is to reduce the amount of high frequency noise. This type of capacitor provides a low impedance path for the high frequency signals, allowing them to bypass the load and go directly to ground. The high frequency noise is then filtered out by the capacitor’s dielectric layer.

Feed through capacitors are usually designed for low-voltage applications, such as for the filtering of circuits that contain sensitive components. The YFF15SC1E472MT000N, for example, is rated for use in noise control applications with an operating voltage up to 25V DC. The maximum leakage current of this particular capacitor is only 0.6µA, so it can be used in applications where very low current output is necessary.

The physical design of feed through capacitors, such as the YFF15SC1E472MT000N, is relatively simple. It consists of two metal electrodes and an insulator, such as an organic dielectric material, that is sandwiched between them. The electrodes are connected to the electrical circuit using two conductive pins, while the insulator acts as a barrier and prevents electrical leakage. This type of capacitor is sometimes referred to as a “feed-through capacitor” because it allows the high frequency signals to pass through its body.

The working principle of the feed through capacitor is fairly straightforward. The capacitor creates an electric field by the applied voltage, which induces a current in the capacitors. This current builds up on the plates of the capacitor, thereby storing energy. As the capacitance of the capacitor increases, the amount of stored energy also increases. This stored energy is then used to filter out the high-frequency noise, allowing only the desired signal to pass through.

Feed through capacitors, such as the YFF15SC1E472MT000N, can be used in a variety of electronic applications, including signal filtering, power supply filtering, DC-DC conversion, motor control, and stability control. They are also used in noise control applications, as well as for the protection of sensitive circuits from overvoltage and overcurrent. Due to their simple design and effective noise filtering capabilities, feed through capacitors continue to be important components in modern electronics.

The specific data is subject to PDF, and the above content is for reference