SG-51P 19.6608MC:ROHS

Series:	SG-51
Packaging:	Tube
Part Status:	Not For New Designs
Base Resonator:	Crystal
Type:	XO (Standard)
Frequency:	19.6608MHz
Function:	Enable/Disable
Output:	CMOS, TTL
Voltage - Supply:	5V
Frequency Stability:	±100ppm
Operating Temperature:	-20°C ~ 70°C
Current - Supply (Max):	23mA
Ratings:	--
Mounting Type:	Through Hole
Package / Case:	14-DIP, 4 Leads (Full Size)
Size / Dimension:	0.780" L x 0.250" W (19.81mm x 6.36mm)
Height - Seated (Max):	0.209" (5.30mm)
Current - Supply (Disable) (Max):	12mA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SG-51P 19.6608MC:ROHS Oscillators

The SG-51P 19.6608MC:ROHS oscillator is a precision oscillator, also known as Clock Oscillator, which is widely used for communication, industrial and military programs. It is also known as a crystal oscillator because it is based on the mechanical resonance of a crystal that has been specifically cut in order to match the electrical requirements of the oscillator.

Design and Operation

The SG-51P 19.6608MC:ROHS oscillator is a quartz crystal that is placed between two metal plates. The plates are used to apply electrical energy to the first plate, which causes the quartz crystal to oscillate at a constant frequency. This frequency is determined by the cut of the crystal and the type of oscillator used.The SG-51P 19.6608MC:ROHS oscillator uses a type called "piezo" oscillator. This type of oscillator uses vibration of a metal disk to generate the electrical signal. It is made up of two opposing metal plates, each with a piezoelectric device in the center. The opposite side of the piezoelectric disk is in contact with the crystal, and when a voltage is applied to the disk, it vibrates. The quartz crystal then vibrates in the opposite direction of the metal disk, and the frequency of the vibration is dependent on the cut of the quartz crystal.

Applications

The SG-51P 19.6608MC:ROHS oscillator is used in a variety of applications such as:-Clocking and synchronization in communication networks-Precision frequency control of embedded systems-Focus motor control in cameras-Frequency multipliers and dividers-Tracking oscillators

Benefits of SG-51P 19.6608MC:ROHS Oscillators

The SG-51P 19.6608MC:ROHS oscillator provides several benefits to users:-The frequency accuracy is excellent, providing reliable and precise operation.-Excellent temperature stability, allowing for stable operation over a wide range of temperatures.-High reliability that meets requirements of military and space applications.-Low power consumption, making them power-efficient and greatly increasing the batteries\' life.-Small size and low cost, making them cheaper than other oscillator types.

Conclusion

The SG-51P 19.6608MC:ROHS oscillator is a precision oscillator that is widely used in a variety of applications. It is based on quartz crystal technology that provides excellent accuracy and reliability even in extreme temperatures. In addition, it is also power-efficient and very cost-effective, providing all the necessary benefits in a small package.

The specific data is subject to PDF, and the above content is for reference