637E5005I2T

Series:	637
Packaging:	Tape & Reel (TR)
Part Status:	Active
Base Resonator:	Crystal
Type:	XO (Standard)
Frequency:	50MHz
Function:	Enable/Disable
Output:	LVPECL
Voltage - Supply:	2.5V
Frequency Stability:	±25ppm
Operating Temperature:	-40°C ~ 85°C
Current - Supply (Max):	88mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	6-SMD, No Lead
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Height - Seated (Max):	0.079" (2.00mm)
Current - Supply (Disable) (Max):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

637E5005I2T Oscillators: Application Field and Working Principle

Oscillators are electronic devices that generate regular aperiodic or continuous electrical signals. 637E5005I2T oscillators, developed by the Quartz Electronic Technology Co. Ltd, are widely used in a variety of applications, including frequency synthesizers, power adaptors, and communication transceivers. In this article, we will discuss the application field and working principle of 637E5005I2T oscillators.

Application Field

637E5005I2T oscillators are used in a wide range of applications, including frequency synthesizers, power adaptors, electronic timepieces, and communication transceivers. They are particularly well-suited for frequency synthesis because they can generate very precise, precise, and stable frequencies from 0.1 to 5MHz. They are also used in power adaptors to provide the correct frequency for different types of devices, such as computers, printers, and fax machines. In addition, they are used in electronic timepieces to maintain accurate timekeeping.

Working Principle

637E5005I2T oscillators use quartz crystal resonators to provide a highly precise and stable frequency output. Quartz crystals are made up of oxygen and silicon atoms, which vibrate at a particular frequency when a small voltage is applied to them. By using a quartz crystal resonator, the 637E5005I2T oscillators generate accurate and stable frequencies over a wide range of frequencies, from 0.1 to 5MHz.The 637E5005I2T oscillators also use an amplitude-controlled oscillator (ACO) to ensure precise control of the frequency and amplitude of the output. The ACO is made up of two parts. The first part is an amplifier with a gain of two, which amplifies the input signal and then sends it to the second part – the feedback network. The feedback network controls the amplitude of the output signal by adjusting the gain of the amplifier. The gain of the amplifier is then adjusted to ensure that the output signal is always within a certain range.

Conclusion

In conclusion, 637E5005I2T oscillators are widely used in a variety of applications. They use quartz crystals to generate highly precise and stable frequencies from 0.1 to 5MHz. They also use an amplitude-controlled oscillator (ACO) to ensure precise control of the frequency and amplitude of the output. This makes them ideal for frequency synthesis, power adaptors, electronic timepieces, and communication transceivers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description