SIT8208AI-8F-25S-66.666600Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices used to generate repetitive signals, either in the form of electrical or mechanical waveforms. They are widely used in many modern electronic applications, such as telecommunication, digital imaging, and entertainment systems. SIT8208AI-8F-25S-66.666600Y is a type of oscillator that falls under the category of Low Jitter, Voltage Controlled Oscillators (VCO).

In many telecom applications, the bandwidth and phase noise of the system need to be controlled for optimal performance. The SIT8208AI-8F-25S-66.666600Y is capable of producing very low jitter signals which are suitable for many telecom applications. The device is designed to be used in a wide range of frequencies, from 1 kHz up to 2.5 GHz. The jitter is kept below 0.15ps rms and the power consumption is very low (under 1mW). In addition, the device has excellent frequency stability over temperature.

The VCO in the SIT8208AI-8F-25S-66.666600Y is controlled by applying different voltage levels to its input terminals. The output frequency can be changed by changing the input voltage levels. The SIT8208AI-8F-25S-66.666600Y also includes an internal charge pumps that can be used to increase the output frequency above the maximum frequency that can be achieved by the VCO. The device also includes a power-down mode which reduces the power consumption when the device is not in use.

The SIT8208AI-8F-25S-66.666600Y is suitable for use in many telecom and entertainment applications. It can be used in radio base stations, mobile communication, GSM, TDMA, and CDMA systems. It can also be used in high-speed data transmission systems and wireless computing. Furthermore, it can be used in cellular network infrastructure, telecom switches, modems, and television set-top boxes. The SIT8208AI-8F-25S-66.666600Y is an excellent choice for those looking for a reliable and low-cost oscillator.

The working principle of the SIT8208AI-8F-25S-66.666600Y is simple. The device consists of an oscillator core and a voltage control unit. The internally generated oscillator signal is compared to a reference signal and the difference between them is used to control the voltage output of the VCO. The voltage output is then compared to the input voltage and the difference is used to adjust the oscillator frequency. This process is known as control-to-frequency conversion and is the basis of the device\'s operation.

In conclusion, the SIT8208AI-8F-25S-66.666600Y is a reliable and low-cost oscillator. It is suitable for use in many telecom applications, such as radio base stations, mobile communication, GSM, TDMA, and CDMA systems, as well as for use in television set-top boxes and other consumer electronic devices. The device is capable of producing signals with very low jitter and excellent frequency stability. It has a low power consumption and operates over a wide frequency range. The working principle is based on control-to-frequency conversion, whereby the output voltage of the VCO is adjusted to achieve the desired frequency.

The specific data is subject to PDF, and the above content is for reference