972-025-01SR031 Connectors, Interconnects |
|
Allicdata Part #: | 972-25SGE-ND |
Manufacturer Part#: |
972-025-01SR031 |
Price: | $ 2.21 |
Product Category: | Connectors, Interconnects |
Manufacturer: | NorComp Inc. |
Short Description: | BACKSHELL DB25 CLAM SLIM GREY |
More Detail: | 25 Position Hinged Backshell Connector Gray 180° U... |
DataSheet: | 972-025-01SR031 Datasheet/PDF |
Quantity: | 131 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | $ 2.00340 |
10 +: | $ 1.92024 |
25 +: | $ 1.76022 |
50 +: | $ 1.68021 |
100 +: | $ 1.60020 |
250 +: | $ 1.40019 |
500 +: | $ 1.36017 |
1000 +: | $ 1.16014 |
2500 +: | $ 1.08013 |
Series: | 972 |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Accessory Type: | Hinged Backshell |
Number of Positions: | 25 |
Cable Type: | Round |
Cable Exit: | 180° |
Shielding: | Unshielded |
Material: | Polyamide (PA66), Nylon 6/6 |
Plating: | -- |
Hardware: | Assembly Hardware, Strain Relief |
Features: | Mating Screws 4-40, Sealed |
Color: | Gray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A 972-025-01SR031 is classified as a D-Sub, D-shaped connector. Generally, these connectors are used for a variety of purposes, such as connecting computer peripherals, serial devices, and D-Sub signals. They are designed to be easy to install and offer great performance. As such, they are often used in a variety of applications.
These connectors are typically comprised of three components, consisting of a backing shell, hood, and phenolic frame. The backing shell is situated against the cable or wire that is being connected. It is designed with rubber-ringed slots to hold the wire or cable in place. The hood then encloses the shell and creates a sealed box. This acts as a barrier from the environment and offers protection for the components inside.
The phenolic frame is the outermost layer of the connector. It consists of a rigid frame that is screwed onto the backing shell. This frame helps to provide support for the other components, and is usually made of ABS plastic or nylon. It also serves to keep the connectors tightly connected.
The 972-025-01SR031 is a popular choice for applications that require high-speed transmissions, such as in computers. It is designed to operate with a wide range of data speeds and is capable of transferring data at speeds up to 1Gbps. It is also compatible with a wide range of connectors, including D-Sub and other standards.
The working principle of a 972-025-01SR031 is based on the concept of impedance matching. The main purpose of this is to ensure consistent operation and optimum performance over the course of its lifetime. Impedance matching is achieved by adjusting the physical characteristics of both the cable and the connector. Such characteristics include the size and shape of the wire, the geometry of the pins, the insulation material, and a variety of other factors.
Impedance matching is necessary to prevent signal deterioration, which can occur when the cable and connector or not properly matched. In order for a successful transmission, the impedance must be matched at both the transmitter and the receiver. If the impedance is not properly matched, then it could lead to signal degradation or data loss.
The 972-025-01SR031 is a great choice for a variety of applications due to its ability to provide reliable connections and excellent data transfer speeds. Not only is it capable of providing consistent impedance matching, but it also helps to protect the internal components from the environment. As such, this type of connector is well-suited for applications where durability and performance are important.
The specific data is subject to PDF, and the above content is for reference
BACKSHELL 68POSPosition Connector
CONN HOOD 68PINPosition Connector
CONN HOOD 80PINPosition Connector
DSUB JUNCTION SHELLPosition Connector
CONN BACKSHELL 50POS C/W 4-4050 Position...
FCT HOOD S1 70 DEG SHLD PLSTC W/9 Positi...