Allicdata Part #: | CP-AD503-ND |
Manufacturer Part#: |
CP-AD503 |
Price: | $ 2.44 |
Product Category: | Connectors, Interconnects |
Manufacturer: | Cinch Connectivity Solutions AIM-Cambridge |
Short Description: | CONN ADAPT PLUG TO JACK BNC |
More Detail: | Adapter Coaxial Connector BNC Plug, Male Pin To BN... |
DataSheet: | CP-AD503 Datasheet/PDF |
Quantity: | 3014 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 2.22390 |
10 +: | $ 2.13192 |
25 +: | $ 1.95426 |
50 +: | $ 1.86543 |
100 +: | $ 1.77660 |
250 +: | $ 1.55454 |
500 +: | $ 1.51011 |
1000 +: | $ 1.28804 |
2500 +: | $ 1.19921 |
Series: | -- |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Adapter Type: | Plug to Jack |
Conversion Type: | Same Series |
Adapter Series: | BNC to BNC |
Center Gender: | Female to Male |
Convert From (Adapter End): | BNC Plug, Male Pin |
Convert To (Adapter End): | BNC Jack, Female Socket |
Impedance: | 50 Ohm |
Style: | Right Angle |
Mounting Type: | Free Hanging (In-Line), Right Angle |
Mounting Feature: | -- |
Fastening Type: | Bayonet Lock, Bayonet Lock |
Frequency - Max: | 4GHz |
Ingress Protection: | -- |
Center Contact Plating: | Gold |
Features: | -- |
Includes: | -- |
Body Material: | Brass |
Body Finish: | Nickel |
Center Contact Material: | Brass |
Dielectric Material: | Polyoxymethylene (POM) Acetal |
Mating Cycles: | -- |
Insertion Loss: | -- |
Operating Temperature: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
CP-AD503 Application Field and Working Principle
The CP-AD503 is a coaxial adapter designed mainly for RF communications and office networking, especially suited for connecting two cables of differing connectors and impedance.
Application
The CP-AD503 is mainly used for connecting two cables of differing connectors and impedance but the same electrical framework. This makes it ideal for radio, TV, data communication and office networking applications, as well as any situation where impedance matching between two cables is required.
Design Parameters
The CP-AD503 is a two-piece adapter which consists of a male-to-male and a female-to-female coupler. The female side has an O-ring for providing strain relief and the male side has a thread for screwing the cables together. This adapter has a maximum voltage rating of 6500 V and can handle up to 1.5 W.
Working Principle
The CP-AD503 adapter works by converting two cables with different connectors and impedance into one single output. The two cables are connected to the male and female couplers of the adapter and secured with the screw. The female coupler is then connected to the male coupler of the other cable, completing the unit. The adapter then draws signal from the two cables, converts it into the same impedance and then outputs it via the single output. This enables a single cable system for sending and receiving signals which would usually require two cables.
Conclusion
The CP-AD503 is an ideal adapter for RF communication and office networking applications, as well as any situation where impedance matching between two cables is necessary. Its two-piece design and O-ring ensures a robust and secure connection, and its maximum voltage rating of 6500 V and power capacity of 1.5 W makes it suitable for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
CONN ADAPT JACK-JACK TNC 50 OHMAdapter C...
ADAPT3.50MM PLUG - N JACKAdapter Coaxial...
ADAPT3.50MM JACK - N PLUGAdapter Coaxial...
ADAPT3.50MM JACK - N JACKAdapter Coaxial...
CONN ADAPT PLG-JCK TRS TWIN/TRIAdapter C...
CONN ADAPT COAX PLUG TO SMA JACKAdapter ...