10091836-R0J-70B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane connectors, of which the 10091836-R0J-70B is a specialized type, are used to provide electrical connection between the multiple boards in a backplane. Backplanes are a type of electrical and/or mechanical assembly that typically lines up multiple printed circuit boards (PCBs) in a parallel fashion, with each PCB connecting into the backplane. These connectors are commonly used in telecommunications equipment, computers, industrial control systems, and instrumentation equipment.

Backplane connectors such as the 10091836-R0J-70B consist of a male and a female port, and are designed to fit into and make an electrical connection with any one port, either male or female, of the backplane. The pins on the male port are arranged in a pattern that is specific to the application, while the female port typically contains several small contacts, known as “cutouts”, which open and close irregularly to make contact with the male pins.

Because backplane connectors must be reliable and secure, they are inserted two or three times to ensure a complete connection. The contacts in the female port are designed to move slightly as they are inserted and held against the male contacts. This repetitive insertion process both mechanically locks the connector into place, and ensures a good electrical contact between the two parts. This process also ensures that the footprint of the connection does not interfere with other components in the backplane.

In addition, most backplane connectors are designed to limit the amount of electrical arcing that occurs. This is important in applications where high-voltage breakouts, or hot-swapping, may be required. The 10091836-R0J-70B, in particular, is designed to prevent arcing by having an arc-nulling gap that is limited to 0.3mm between contacts. The 10091836-R0J-70B backplane connector is also designed to be fully compatible with shielded cables, and is capable of passing a high-frequency signal without distortion.

Manufactured from zinc die-cast alloy, the 10091836-R0J-70B backplane connector is designed to be durable and reliable in a variety of environmental conditions. The male port of the connector has a flange that permits a strong holding force, while the female port contains an inner retaining mechanism designed to reduce the effects of vibration and shock, and prevent pin ejection. The contacts on both ports are gold-plated, allowing them to maintain a solid connection and resist corrosion.

Backplane connectors such as the 10091836-R0J-70B are used in a wide variety of applications, including telecommunications, computers, industrial control systems, and instrumentation systems. The use of backplane connectors in these applications allows multiple printed circuit boards to be connected to each other securely and reliably. The 10091836-R0J-70B backplane connector is designed to be durable and reliable in a variety of environmental conditions, and is capable of providing a reliable connection between multiple printed circuit boards.

The specific data is subject to PDF, and the above content is for reference