1-1674231-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Blade Type Power Connectors

Blade type power connectors are a kind of attachment interface often used in low voltage electronic equipment assembly line production. Common blade type power connectors include ZPM-207, MC-RC16, MC-R16M, MC-R232 and so on.

1-1674231-1 Application Field and Working Principle:

The 1-1674231-1 blade type power connector is mainly used in the fields of digital products, chargers, and car parts. The product is a six-way connector with a 3.5mm pitch and a 1.0mm terminal distance, which is suitable for a variety of power inputs in digital products and car parts. In order to ensure the reliability of the product, this kind of connector is designed with an anti-reverse device.

The working principle of 1-1674231-1 blade type power connector is based on the principle of spring contact. When the shell of 1-1674231-1 connector is connected, the elastic contacts of the pins are connected to the corresponding terminals. At the same time, the outer shell is tightly connected due to the snap-in device and the flat arch part, so that the circuit connection is completed.

To ensure the reliability of the connection, the contact-resistance of the 1-1674231-1 connector is very low, and the contact force of the contact is kept within an acceptable range. Therefore, the same-current can freely flow through the connector, and the contact surface has no welding and no virtual welding. It is reliable and durable. For ordinary digital products and vehicle parts, the 1-1674231-1 connector can be applied.

Product Features

The 1-1674231-1 blade type power connector is designed with a special anti-reverse device, which ensures that the connector can only be inserted in the correct direction. This eliminates the possibility of reverse insertion, which may cause problems in the power supply and post failure. And the structure of the 1-1674231-1 connector is very simple, not only easy to assemble, but also wear-resistant and corrosion resistant, and the contact force is stable.

The 1-1674231-1 connector integrates mechanical and electrical aspects. In order to ensure that the connector has a certain strain resistance and elasticity in long-term use, the design with poppet spring structure is used in the key connectors, and at the same time, the key connectors are snap-in to ensure the connection is not open. In addition, the 1-1674231-1 connector also meets the requirements of international safety standards UL, FCC, TUV, CE and VDE.

Assembly of 1-1674231-1 Connectors

Since the 1-1674231-1 connector is a complicated electronic product, special steps need to be followed during the installation. First of all, the installation preparation should be completed: the soldering tin should be applied on the terminal, and the wire of the boot jack should be cut to the appropriate length to ensure that it can be inserted into the socket.

After the above preparation is completed, the connectors can be successfully connected. First, align the pins of the connector with the terminals and insert them into the socket. Then, rotate the rotating latch to fix the connector in a specific position. Finally, attach the connectors to the circuit board and screw them into place. In this way, the 1-1674231-1 connector can be securely connected.

Conclusion

The 1-1674231-1 blade type power connector is widely used in various digital and vehicle products due to its simple structure and low contact resistance. In addition, the connector is also designed with anti-reverse and wear-resistant features to ensure reliable performance. Through the above introduction, we can understand the application field and working principle of 1-1674231-1 connectors, as well as the installation and maintenance points in the use process.

The specific data is subject to PDF, and the above content is for reference