61765-1 Allicdata Electronics
Allicdata Part #:

A27890-ND

Manufacturer Part#:

61765-1

Price: $ 0.32
Product Category:

Connectors, Interconnects

Manufacturer: TE Connectivity AMP Connectors
Short Description: CONN ADPT 0.25 TABS TO 0.25 RCPT
More Detail: Terminal Adapter Connector 0.25" (6.35mm) 1/4" Qu...
DataSheet: 61765-1 datasheet61765-1 Datasheet/PDF
Quantity: 15829
1 +: $ 0.28350
10 +: $ 0.26334
25 +: $ 0.23688
50 +: $ 0.21055
100 +: $ 0.20179
250 +: $ 0.18426
500 +: $ 0.17549
1000 +: $ 0.14478
2500 +: $ 0.13162
Stock 15829Can Ship Immediately
$ 0.32
Specifications
Series: Faston
Part Status: Active
Convert From (Adapter End): 0.25" (6.35mm) 1/4" Quick Connect, Male (2)
Convert To (Adapter End): 0.25" (6.35mm) 1/4" Quick Connect, Female
Insulation: Non-Insulated
Features: Side by Side Male Terminals
Contact Material: Brass
Contact Finish: --
Color: --
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminals - Adapters

61765-1 application field and working principle terminal adapters are used primarily for serial communication and for diagnostics. The most common type of terminal adapter is the "Uart Adapter" which is used against a microcontroller for communication with either a host computer or devices. The adapter converts between the two types of communication, serial and parallel, allowing for greater compatibility with legacy systems.Serial communication is the most common type of communication used with terminal adapters. It is most commonly used to connect a host computer or device to a microcontroller, as well as to connect one microcontroller to another. Serial communication uses either a serial port or a universal asynchronous receiver/transmitter (UART). UARTs are simple hardware devices that allow computers and microcontrollers to communicate.Terminal adapters use the UART\'s hardware features to communicate with the microcontroller. UARTs have two primary jobs: to send data from the host to the microcontroller, and to receive data from the microcontroller to the host. In order for the device to understand the data sent and received, it needs to be converted into the appropriate format. This conversion is where the terminal adapter comes in. The terminal adapter converts the data received from the UART into the correct format for the specific microcontroller used. This process is known as protocol translation. For example, if a serial port has a data rate of 115200 baud, the terminal adapter can be used to convert it into the format used by the specific microcontroller. This allows for communication between the host computer and the microcontroller.Terminal adapters also allow for communication between devices that have different clock speeds and data rates. This is done by the terminal adapter using either a clock converter or a baud rate converter. The clock converter is used to match the clock speeds of both devices whereas the baud rate converter is used to match the data rate of both devices. This ensures that the data sent from one device to the other is received and understood correctly. As well as allowing communication between devices, terminal adapters can also be used for diagnostics. This means they can be used to test the performance of a device or check for faults. To do this, the terminal adapter sends a special signal to the device being tested, allowing for the diagnosis of the device. This testing can be used to detect failures, detect problems with the device, or make sure that the device is working correctly.Terminal adapters can also be used to make programming and debugging of microcontrollers easier. As well as providing a connection between the device and the host computer, the adapter also provides access to the pins and ports of the microcontroller, allowing for the programming and debugging of the device.In summary, terminal adapters are used for serial communication and diagnostics. They are used to convert between the different formats of serial and parallel communication as well as to match the clock speeds and data rates of different devices. They can also be used for diagnostics, programming, and debugging.

The specific data is subject to PDF, and the above content is for reference

Related Products
Search Part number : "6176" Included word is 11
Part Number Manufacturer Price Quantity Description
61769-1 TE Connectiv... 0.02 $ 1000 CONN SPLICE 1200-2600 CMA...
61769-2 TE Connectiv... 0.02 $ 1000 CONN SPLICE 1200-2600 CMA...
61764-1 TE Connectiv... 0.04 $ 40000 CONN RING OVAL 16-20AWG #...
M39003/01-6176/TR Vishay Sprag... 2.62 $ 1000 CAP TANT 0.27UF 5% 50V AX...
61761-2 TE Connectiv... 0.12 $ 812 CONN QC TAB 0.1870.187" (...
61765-1 TE Connectiv... 0.32 $ 15829 CONN ADPT 0.25 TABS TO 0....
61765-2 TE Connectiv... 0.34 $ 8085 CONN ADPT 0.25 TABS TO 0....
8-61765-1 TE Connectiv... 0.26 $ 1000 CONN ADPT 0.25 TABS TO 0....
M39003/01-6176 Vishay Sprag... 3.03 $ 1000 CAP TANT 0.27UF 5% 50V AX...
M39003/01-6176H Vishay Sprag... 3.03 $ 1000 CAP TANT 0.27UF 5% 50V AX...
M39003/01-6176/HSD Vishay Sprag... 3.07 $ 1000 CAP TANT 0.27UF 5% 50V AX...
Latest Products
MA250DMFMK

CONN ADPT 0.25 TABS TO 0.25 RCPTTerminal...

MA250DMFMK Allicdata Electronics
W2334-00

CONN ADPT TURRET M3 TO FEMALE M3Terminal...

W2334-00 Allicdata Electronics
0190430009

CONN ADPT .187 TABS TO .187 RCPTTerminal...

0190430009 Allicdata Electronics
0191630178

CONN ADPT 0.25 TAB TO 0.25 TABTerminal A...

0191630178 Allicdata Electronics
1217933-1

CONN ADPT .187 TAB TO .187 RCPTTerminal ...

1217933-1 Allicdata Electronics
151939-1

CONN ADPT 0.25 RCPT TO TERMTerminal Adap...

151939-1 Allicdata Electronics