KC2016K20.0000C10E00

Series:	KC2016K, Kyocera
Packaging:	Tape & Reel (TR)
Part Status:	Active
Base Resonator:	Crystal
Type:	XO (Standard)
Frequency:	20MHz
Function:	Standby (Power Down)
Output:	CMOS
Voltage - Supply:	1.6 V ~ 3.63 V
Frequency Stability:	±50ppm
Operating Temperature:	-10°C ~ 70°C
Current - Supply (Max):	3.5mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Height - Seated (Max):	0.032" (0.80mm)
Current - Supply (Disable) (Max):	5µA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is a device that creates an electrical signal without any external input. It is a basic component of many electronic systems, and it is used in many applications such as radio transmitters, receivers, and power supplies. KC2016K20.0000C10E00 is an oscillator specifically designed for use in telecommunication systems. It is a low cost, low power, low noise device that is ideal for use in cellular wireless systems such as GSM and CDMA.

Application Field

KC2016K20.0000C10E00 is primarily used in cellular wireless systems as a frequency generating circuit. In such systems, the oscillators generate signals with a frequency that is close to the network\'s reference frequency. The oscillators generate signals that are within close tolerances to ensure that modulation can occur without being distorted. These oscillators are also used in cable television systems for generating the TV signal. KC2016K20.0000C10E00 is also used in remote control systems such as those used to control garage doors, remote controls for consumer electronics, and access control systems. These remote control systems use the same principles as cellular wireless systems, but at a much lower frequency.

Working Principle

The KC2016K20.0000C10E00 oscillator works on the principle of positive feedback. In a positive feedback circuit, a portion of the output signal is fed back to the input. This causes the input signal to be amplified, creating a self-sustaining oscillation. In the case of the KC2016K20.0000C10E00, the oscillator consists of an inverting amplifier, a comparator, and a voltage controlled oscillator. The inverting amplifier amplifies the input signal and sends it to the comparator. The comparator then compares the amplified signal with a reference signal which is generated by the voltage controlled oscillator. The comparator then produces an output signal that is sent back to the inverting amplifier. The amplified signal is then sent to the voltage controlled oscillator. The voltage controlled oscillator then compares the amplified signal with the reference signal and adjusts the frequency of the output accordingly. The output signal from the oscillator is then sent to the circuit that is being driven by the oscillator. This allows the circuit to be driven at the required frequency. In conclusion, the KC2016K20.0000C10E00 oscillator is a low cost, low power, low noise device that is ideal for use in cellular wireless systems such as GSM and CDMA, as well as remote control systems. It uses positive feedback to create a self-sustaining oscillation that can be used to drive other circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description