Z-200SM Allicdata Electronics
Allicdata Part #:

553-1652-ND

Manufacturer Part#:

Z-200SM

Price: $ 2.68
Product Category:

Filters

Manufacturer: Pulse Electronics Network
Short Description: FILTER DSL SNGL JACK RF BLOCKING
More Detail: N/A
DataSheet: Z-200SM datasheetZ-200SM Datasheet/PDF
Quantity: 90
1 +: $ 2.43810
10 +: $ 2.03175
25 +: $ 1.74737
50 +: $ 1.70667
Stock 90Can Ship Immediately
$ 2.68
Specifications
Series: Z-BLOCKER®
Part Status: Active
Input Type: Single-Line
Output Type: 1 Jack, Filtered
Mounting Type: In Line
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The Z-200SM is a type of DSL filter, and it’s core purpose is to minimize interference between a DSL and a telephone line. This type of filter is often used when installing a digital subscriber line (DSL) connected device, as it can help ensure proper signal quality. In essence, the Z-200SM DSL filter acts as a low-pass filter that restricts high-frequency signals. This is done so that it can allow only the desired data and signals to pass through, while simultaneously blocking out interference from other sources.

When installing a DSL modem, the Z-200SM is typically connected to the phone line or DSL modem itself to prevent interference. This filter is important because it prevents interference from electric and radio signals from causing disruption to phone or data transmissions, and thus significantly reduces the amount of effort required to troubleshoot any disruption issues.

The Z-200SM filter works by blocking certain frequency ranges - usually those above 4 kHz - from passing through. This make sure that only the desired signals, such as voice and data, reach the DSL modem. Not only does this prevent interference from outside sources, but it also reduces cross-talk between the DSL modem and the telephone line.

The Z-200SM filter is usually easy to install and use. All that is required is to connect the DSL modem to the telephone line, and then plug the filter into the wall jack. This will ensure that only the desired signals will be able to pass through the filter, and will be received by the modem.

The Z-200SM filter is an important piece of equipment for any DSL installation, and can help ensure quality data and voice transmissions. By blocking interference from other sources, it prevents disruptions to phone and data transmissions, while also reducing cross-talk between the modem and the phone line. This makes the Z-200SM filter a necessary piece of equipment for any DSL installation.

The specific data is subject to PDF, and the above content is for reference

Latest Products
CP-V413WT

SPLITTER VDSL ADSL SCRW TRMNAL

CP-V413WT Allicdata Electronics
Z-D250CWA

FILTER DSL DUAL-LINE WALLMOUNT

Z-D250CWA Allicdata Electronics
Z-330CW

FILTER DSL ANSI WALLMOUNT

Z-330CW Allicdata Electronics
Z-230TJ

FILTER DSL/SINGLE IN-LINE PHONE

Z-230TJ Allicdata Electronics
CP-V413PS

SPLITTER VDSL ADSL FLUSHMOUNT

CP-V413PS Allicdata Electronics
Z-A431PJ31X

FILTER DSL ALARM PANL SINGLE WHT

Z-A431PJ31X Allicdata Electronics