K8AB-VS3 100/115VAC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The K8AB-VS3 100/115VAC Application Field and Working Principle falls into the category of Monitor - Current/Voltage - Relay Output. It is one of the most versatile control devices on the market today, providing reliable and cost-effective solutions for a variety of industrial applications. This device is designed with an integrated circuit for current and voltage monitoring.

The K8AB-VS3 100/115VAC is a single-phase or three-phase AC and DC monitor. It has an adjustable gain and current trip level with two-level delay time settings. The current monitoring range is 0.4 (± 0.4 ) to 6 (± 0.6A). It is possible to monitor four phases with the K8AB-VS3 100/115VAC.

Most AC and DC current sensors use hall sensors, which detect magnetic fields around an electrical conductor or transformer and measure the current. The K8AB-VS3 100/115VAC uses hall sensors that measure current based on the relationship between current, inductance, and resistance. The hall sensor is then connected to an integrated circuit for current and voltage monitoring. This device provides an output signal when the current, voltage, or phase current reaches a predetermined value.

The K8AB-VS3 100/115VAC has a built-in relay output that will activate when the current or voltage reaches a predetermined level. The relay is set to the "ON" state when either the current or voltage reaches the preset level. The relay can be adjusted to be activated when the current or voltage drops below the set point.

The K8AB-VS3 100/115VAC has two-level delay time settings. The delay time is set to indicate the total time the current or voltage is monitored before the relay switches to the "ON" or "OFF" state. The device is designed to save power by limiting the amount of time the relay is active.

The K8AB-VS3 100/115VAC has an adjustable gain and current trip level. This device has an adjustable gain for current monitoring that can be adjusted by changing the potentiometer\'s resistance. The current trip level for the device can also be adjusted, allowing it to be set to match various applications. This device is designed to provide reliable and cost-effective current and voltage monitoring solutions for a variety of uses.

In summary, the K8AB-VS3 100/115VAC Application Field and Working Principle can be classified as a Monitor - Current/Voltage - Relay Output. It is a versatile control device that provides reliable and cost-effective solutions for a variety of industrial applications. It provides an adjustable gain and current trip level, two-level delay time settings, and a built-in relay output. With its adjustable gain and current trip level, this device can be used to monitor a wide range of applications. Its two-level delay time settings allow it to be set to match various applications, while also providing a way to save power by limiting the amount of time the relay is active.

The specific data is subject to PDF, and the above content is for reference