K8DT-VW2TA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The K8DT-VW2TA device belongs to the family of monitor current/voltage and relay output devices. These devices are normally used in industrial, commercial, and residential applications to provide overcurrent protection, under voltage protection, overvoltage protection, and circuit breaker fault protection. These devices can measure the voltage and current on main lines and can generate a relay signal when an abnormal voltage or current is detected.

A K8DT-VW2TA device consists of two components. The first component is an integrated circuit that contains the control circuitry needed to monitor, measure, and control current or voltage values. The second component is a solid-state relay that can open and close the circuit when an abnormal voltage or current is detected. These devices can be mounted directly on a DIN rail or enclosed in an appropriate enclosure.

The K8DT-VW2TA device has several different operating modes. In the auto mode, the device will automatically monitor the current or voltage for an adjustable amount of time before generating an alarm or trip signal. In the manual mode, the device will not automatically monitor, but instead, the user can manually monitor the current or voltage and take appropriate action.

The K8DT-VW2TA device\'s programming is done via a combination of DIP switches and a programming software package. The DIP switch allows for adjustment of the operating conditions and the programming software allows for more complex programming. The parameters that can be adjusted in the programming software include the main line current or voltage limits, trip duration, and alarm thresholds.

The K8DT-VW2TA device\'s relay output can be used to control a wide range of load circuits. The relay output can be used to protect small loads, large loads, or both. The device also has the capability of providing an optical status indicator which can show the status of the device or the load circuit being monitored.

In addition to its main purpose of providing protection, the K8DT-VW2TA device can also be used to measure the current or voltage on the main lines. This feature can be useful for diagnosing problems with the main lines or making sure that the lines are properly wired.

The K8DT-VW2TA device can be installed in virtually any application where current or voltage needs to be monitored and controlled. It is very easy to install and use, making it an attractive solution for the majority of applications. Additionally, it is relatively inexpensive compared to other types of devices, making it an economical choice for many applications.

The specific data is subject to PDF, and the above content is for reference