P1020NXN2HFB

Series:	QorIQ P1
Packaging:	Tray
Part Status:	Active
Core Processor:	PowerPC e500v2
Number of Cores/Bus Width:	2 Core, 32-Bit
Speed:	800MHz
Co-Processors/DSP:	--
RAM Controllers:	DDR2, DDR3
Graphics Acceleration:	No
Display & Interface Controllers:	--
Ethernet:	10/100/1000 Mbps (3)
SATA:	--
USB:	USB 2.0 + PHY (2)
Voltage - I/O:	2.5V, 3.3V
Operating Temperature:	-40°C ~ 105°C (TA)
Security Features:	--
Package / Case:	689-BBGA Exposed Pad
Supplier Device Package:	689-TEPBGA II (31x31)
Additional Interfaces:	DUART, I²C, MMC/SD, SPI
Base Part Number:	P1020

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Embedded - Microprocessors:P1020NXN2HFB Application Field and Working Principle

An embedded microprocessor, also known as an embedded CPU, is a low-power and low-cost CPU integrated into a custom-made system-on-chip (SoC). It is used in a wide variety of applications, from industrial automation and robotics to consumer electronics and embedded systems. The P1020NXN2HFB is an embedded CPU from NXP Semiconductors, designed for a range of industrial applications. In this article, we’ll discuss the features, applications, and working principle of the P1020NXN2HFB CPU.

Features of the P1020NXN2HFB

The P1020NXN2HFB is a dual-core embedded processor that offers a range of features designed for power efficiency and performance. It is based on the Power Architecture® e6500 core, a highly efficient core that offers a maximum frequency of 1.2 GHz and a thermal power of 5 W. The CPU is also equipped with integrated FLASH memory and RAM, and integrated USB, Ethernet, and peripheral interfaces. In addition, the P1020NXN2HFB supports up to two simultaneous displays.

Applications of the P1020NXN2HFB

The P1020NXN2HFB is designed for a wide range of applications, including industrial control, automation, robotics, vision systems, communications, and consumer electronics. It is well suited to applications that require a low-power and cost-effective CPU, such as wearable devices, Internet of Things (IoT) nodes, set-top boxes, and portable medical equipment.

Working Principle of the P1020NXN2HFB

The P1020NXN2HFB works by executing instructions stored in its internal memory. The CPU uses a Von Neumann architecture, meaning it can simultaneously read and process data. Once data is read from memory, it is processed by the CPU’s ALUs (Arithmetic Logic Units). These in turn use the data to control how the CPU jumps between instructions in its instruction set. Once the instructions are fetched from memory and processed, the CPU updates a set of registers that store the current machine state. These registers determine the actions of the CPU, such as the flow of program execution and the loading of data from memory. The CPU updates these registers continually, based on the instructions it reads from memory. Once a program has been executed, the CPU outputs the results as output signals. These output signals can be used to control external systems, such as servos or motors. In addition to the CPU core, the P1020NXN2HFB also contains a clock and power management unit that regulates the power consumption and operation frequency of the CPU. The clock and power management unit can be used to adjust the frequency and power consumption of the CPU automatically, to ensure it is operating at the highest possible performance level while consuming minimal power.

Conclusion

The P1020NXN2HFB is an embedded processor from NXP Semiconductors, designed for a wide range of industrial applications. It is based on the highly efficient Power Architecture® e6500 core, and is equipped with integrated FLASH memory, RAM, and USB, Ethernet, and peripheral interfaces. The CPU can be used for applications that require a low-power and cost-effective CPU, such as wearable devices, IoT nodes, set-top boxes, and portable medical equipment. The P1020NXN2HFB works by fetching instructions from its internal memory, processing them using its ALUs, and outputting the results as output signals. It also has a clock and power management unit to ensure the CPU operates at its highest possible performance level while consuming minimal power.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description