TL16CP554APM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UARTs (Universal Asynchronous Receiver Transmitter), also known as serial ports, are interfaces used to transmit data between two systems. They are widely used in embedded systems to provide serial communication with external devices and peripherals. The TL16CP554APM is a low-cost, high-performance UART that provides full-duplex asynchronous communication. This paper will discuss the application fields of the TL16CP554APM and the working principles of UARTs.

Applications of the TL16CP554APM

The TL16CP554APM is a single-channel UART with an on-chip 16-byte FIFO buffer that is designed for use in embedded systems such as industrial control, home automation, automotive, and other low-end automation applications. Its low power consumption makes it suitable for applications where power efficiency is important. The UART supports a wide range of communication protocols, including RS-232, RS-485, USB, and CAN bus. Additionally, the UART is compatible with processor bus architectures such as ARM, 8051, and MIPS.

The TL16CP554APM also supports programmable baud rates, allowing for transmission speeds up to 115.2kbps. It also has integrated ESD protection to protect against electrostatic discharge damage. Moreover, it supports auto baud rate detection, frame error checking, and hardware flow control. This makes the TL16CP554APM ideal for applications that need reliable, high-speed data transmission.

Working Principle of UARTs

UARTs are essentially digital circuits that use asynchronous transmission techniques to transfer data serially between two systems. The data is sent one bit at a time over a communication link using a start bit, followed by data bits (which can be 5, 6, 7, or 8 bits in length), and ending with a stop bit. The UART then converts the serial data stream into parallel words that are sent to the data bus for further processing.

UARTs also typically use a parity bit to detect errors. The parity bit is either an odd or an even bit that is transmitted together with the data bits. If any errors are detected in the data transmission, the UART can generate an error signal to alert the system.

UARTs also include hardware flow control signals, such as RTS/CTS and XON/XOFF, which are used to control the data flow between the two systems. The hardware control signals allow the receiver to pause and resume the data transmission depending on the available buffer space in the UART.

Finally, UARTs use a baud rate generator to control the speed of data transmission. The baud rate generator generates a clock signal that is used to synchronize the data bits. The baud rate can be set by the user and typically ranges from 0 to 115200 bits per second.

Conclusion

The TL16CP554APM is a low-cost, high-performance UART designed for use in embedded systems. It supports a wide range of communication protocols, programmable baud rates, low power consumption, integrated ESD protection, and hardware flow control. It is ideal for applications that need reliable, high-speed data transmission.

UARTs are digital circuits used to transfer data serially between two systems. They use asynchronous transmission techniques, parity bits for error detection, and hardware flow control signals for controlling the data flow. They also use a baud rate generator to control the speed of data transmission.

The specific data is subject to PDF, and the above content is for reference