XC17S150AVO8C Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

XC17S150A devices are designed for use as configuration memory devices for Field Programmable Gate Arrays (FPGAs). This type of device is also known as a configuration PROM, or configuration FLASH. These devices allow FPGAs to be programmed with configuration data and data for initialization, communication and other operations.

The XC17S150A is offered in two varieties, PN (Programmable Non Volatile) and VN (Volatile Non Volatile).The PN version is typically suited to configure a single FPGA, while the VN is best suited to configure multiple FPGAs or across several systems that need to be updated frequently. All versions of the XC17S150A are configurable using the Xilinx series of WBSoftware.

Application Field

The primary application fields of XC17S150A devices are FPGA configuration programmable devices. Xilinx FPGAs and other major FPGA manufacturers are supported. Xilinx FPGAs are built around the Virtex architecture, and the XC17S150A devices can be used with various Virtex family devices, including Virtex I, Virtex II, Virtex4 and Virtex-5 FPGAs, as well as the newer 7 Series FPGAs.

The XC17S150A can also be used in a wide range of applications including medical, industrial, avionics, telecoms, defense, automotive, and consumer electronics. Examples of these applications include remote control systems, traffic monitoring systems, home automation systems, military and civilian aircraft control systems, GSM-based telecommunication systems, and automotive reversing systems.

Working Principle

The XC17S150A works by storing configuration data on the device and then sending it to the FPGA when it is needed. The configuration data contains instructions that allow the FPGA to operate in a desired manner. It can be programmed using the Xilinx WBSoftware, which is designed to make programming the XC17S150A devices a relatively easy process.

The first step in programming the XC17S150A is to create a design file. This design file contains the desired configuration data, which can either be written manually or read from an existing design. Once the design is complete, it is saved as an SRX file, which then needs to be converted into an RBF (Raw Binary File) file. This RBF file is then programmed into the XC17S150A device.

The XC17S150A device is then installed on the target FPGA and the FPGA is powered up. The XC17S150A device then sends the configuration data to the FPGA, which is then configured according to the instructions in the data. The FPGA is then ready to execute the instructions in the configuration data.

The XC17S150A device is a reliable and cost-effective way to store the configuration data that is needed to program FPGAs. The device\'s nonvolatile memory and low power requirements make it an ideal choice for many different types of FPGA applications.

The specific data is subject to PDF, and the above content is for reference