Allicdata Part #: | 240-2224-ND |
Manufacturer Part#: |
K-403 EMI A DEMO |
Price: | $ 24.93 |
Product Category: | Kits |
Manufacturer: | Laird-Signal Integrity Products |
Short Description: | KIT EMI FERRITE CORE CLAMP-ON |
More Detail: | Ferrite Cores - Cables and Wiring Kit 14 Pieces (1... |
DataSheet: | K-403 EMI A DEMO Datasheet/PDF |
Quantity: | 30 |
1 +: | $ 22.66740 |
10 +: | $ 20.28220 |
25 +: | $ 15.98720 |
50 +: | $ 15.50980 |
100 +: | $ 13.60090 |
250 +: | $ 12.55100 |
500 +: | $ 12.02610 |
Series: | -- |
Packaging: | Plastic Box with Bin Guide |
Part Status: | Active |
Kit Type: | Ferrite Cores - Cables and Wiring |
Quantity: | 14 Pieces (14 Values - 1 Each) |
Mounting Type: | -- |
Packages Included: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
K-403 EMI A DEMO application field and working principleElectromagnetic interference (EMI) is a very common source of electronics. EMI spills from electrical or electronic equipment that create a frequency-dependent disturbance in the form of an electrical or magnetic field. There are a variety of sources such as AC power cords, radio frequency (RF) transmitters, solid state drives, or even air coolers that can create enough EMI to interfere with other electronics. This interference can cause noise, signal distortion, and more serious issues such as data loss, malfunctioning, and system shutdowns in the connected device. In order to mitigate this issue, EMI filters, also known as EMI suppression filters, are used to reduce or eliminate this interference.
One type of EMI filter that is available in the market is the K-403 EMI A DEMO filter. It is designed to provide exceptional electromagnetic shielding and suppression of EMI in a wide range of applications. This filter is classified under EMI Filters, and it is suitable for use in AC mains power lines, telecommunications equipment, and instrumentation. The K-403 EMI A DEMO filter is made up of four components: a power conductor, a capacitor, an inductor, and an EMI shield.
The power conductor is a copper or aluminum bar that carries the power signal. It has a layer of insulation and is designed to reduce the potential for EMI to leak out. The capacitor is a high-frequency device that acts as a low-pass filter, allowing only certain frequencies to pass through while blocking out others. The inductor acts as an impedance-matched transformer that can reduce the voltage across its terminals, thus reducing the electrical noise. Finally, the EMI shield is a combination of an electrically conductive surface and an insulating material. This shield is used to reduce the amount of EMI that is emitted from a device.
The K-403 EMI A DEMO filter works by limiting the amount of EMI that is emitted from an electronic device. It does this by filtering out the higher frequencies and allowing only those frequencies that are required by the device to pass through. This helps to reduce the amount of interference that can disrupt other connected devices. The filter also provides a layer of protection to prevent EMI from entering the device, which helps to ensure a stable and secure connection.
The K-403 EMI A DEMO filter is ideal for a variety of applications, including high-powered industrial equipment, consumer electronics, telecommunications, and medical equipment. It can also be used to protect sensitive instrumentation and data from EMI interference. This filter is easy to install and is available in a variety of sizes and configurations to suit any application.
In conclusion, the K-403 EMI A DEMO filter is an effective and reliable way to reduce the amount of EMI that is emitted from electronic devices and to protect sensitive equipment from EMI interference. It is a versatile filter that can be used in a variety of applications, and it is easy to install and use. This filter can provide peace of mind that the device being protected will be safe from EMI interference.
The specific data is subject to PDF, and the above content is for reference
ENGINEERING KIT - WIDEBAND - SOLFerrite ...
SMT-COMMON MODE CHOKE SAMP PBCCommon Mod...
SMT EMI/RFI FILTER KITEMI/RFI Filters (L...
SMT EMI FLTR / FEEDTHRU CAP KITFeed Thro...
EMI FILTER KIT C TYPEFeed Through Capaci...
EMI FILTER KIT C TYPEEMI/RFI Filters (LC...