Allicdata Part #: | 1102-6018-ND |
Manufacturer Part#: |
VI-J23-CX |
Price: | $ 119.85 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 24V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 24V 3.... |
DataSheet: | VI-J23-CX Datasheet/PDF |
Quantity: | 3 |
1 +: | $ 108.95200 |
10 +: | $ 105.43700 |
Specifications
Series: | VI-J00™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 21V |
Voltage - Input (Max): | 56V |
Voltage - Output 1: | 24V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 3.13A |
Power (Watts): | 75W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, SCP |
Operating Temperature: | -25°C ~ 100°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Half Brick |
Size / Dimension: | 2.28" L x 2.40" W x 0.50" H (57.9mm x 70.0mm x 12.7mm) |
Base Part Number: | VI-J23 |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC ConvertersThe VI-J23-CX is a type of DC-DC converter that is used to convert a high input voltage, low current DC source to a low voltage, high current DC source. It can operate over a wide operating temperature range of -55°C to +85°C. This type of converter is widely used in telecommunications applications, aerospace, and in the defense sectors.The VI-J23-CX is a voltage-mode, step-down DC-DC converter. It is a non-isolated buck converter that works in a three-stage process. The first stage consists of a voltage regulator and a rectifier to convert the input DC voltage into regulated DC voltage. The second stage is the switching regulator stage, where a MOSFET is used to switch the input voltage on and off at a frequency of around 25 kHz. This frequency is chosen so that the frequency of the output is low enough to comfortably filter out the switching noise. In the third stage, an inductor filter is used to smooth the voltage, and a capacitor is used to filter out the high frequency ripple.The VI-J23-CX has several features which enhance its performance. It has a high efficiency, which can vary from 85-90%. It also has high power density, and can support a maximum output power of 40 Watts. The VI-J23-CX also has a low output noise, thanks to its capacitive filter, and its output is very stable. It is also protected from overvoltage and short circuit.The VI-J23-CX is available in several packages. It comes in a surface mount package that is 0.2 inches x 0.2 inches, and has a standard operating temperature range of 0-85°C. The package also has a hole through which a thermistor can be mounted, so that the converter can be monitored by the user.In conclusion, the VI-J23-CX is a reliable and efficient DC-DC converter for applications that require a low voltage, high current DC output. Its wide operating temperature range, high efficiency, and low output noise make it suitable for a wide range of applications. Its surface mount package also makes it suitable for use in space-constrained applications.The specific data is subject to PDF, and the above content is for reference
Latest Products
AEQ20B48N-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEO40Y48N-6L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-6L
DC DC CONVERTER 1.8V 120WIsolated Module...