Allicdata Part #: | VI-JT1-IW-B1-ND |
Manufacturer Part#: |
VI-JT1-IW-B1 |
Price: | $ 210.66 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 12V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 12V 8.... |
DataSheet: | VI-JT1-IW-B1 Datasheet/PDF |
Quantity: | 19 |
1 +: | $ 191.50700 |
10 +: | $ 185.33300 |
Series: | VI-J00™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 66V |
Voltage - Input (Max): | 160V |
Voltage - Output 1: | 12V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 8.33A |
Power (Watts): | 100W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, SCP |
Operating Temperature: | -40°C ~ 100°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Half Brick |
Size / Dimension: | 2.36" L x 2.28" W x 1.08" H (59.9mm x 57.9mm x 27.4mm) |
Base Part Number: | VI-JT1 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are widely used in industrial, automotive and commercial applications. The VI-JT1-IW-B1 is a compact and lightweight DC/DC converter designed for high power applications and is capable of up to 3000 watts of power output. It is designed for use in applications such as industrial automation, automotive, or telecommunications. It is also suitable for medical and renewable energy applications.
One of the most important features of the VI-JT1-IW-B1 is its small size. It is just 4.2 inches long, 3.1 inches wide and 0.8 inch deep, making it well-suited for installation in tight spaces. It also has an extremely low weight, making it ideal for applications where portability is important.
The VI-JT1-IW-B1 is capable of producing a variable rated output voltage ranging from 10 to 111 volts DC, with a current rating up to 30 amps. It is designed to operate in a temperature range between minus 40 and 110 degrees Celsius. It also helps to reduce power losses as its heat dissipation is only 0.35 watts per amp at full load.
The VI-JT1-IW-B1 converter uses pulse width modulation (PWM) to convert alternating current (AC) to direct current (DC). The primary device in the converter is an insulated-gate bipolar transistor (IGBT). The IGBT is used to switch the primary winding of a transformer at a high frequency, effectively transforming the AC input voltage into an adjustable DC voltage.
The converter has three input stages: a primary rectifier stage for rectification of the AC input voltage, a secondary rectification stage for providing a desirable DC voltage at the output nodes, and a filter stage for eliminating voltage ripple. The voltage ripple amount can be adjusted by changing the duty cycle of the pulse width modulation signal.
The VI-JT1-IW-B1 converter is protected against short-circuit, overload, overvoltage and overtemperature conditions. It provides additional protection against transient voltage surges and noise. It also includes an active current limit circuit which limits the output current and prevents damage in over-current situations.
The VI-JT1-IW-B1 converter is designed for applications that require a high power DC/DC converter with high power density and efficiency. Its low weight and small size make it ideal for applications where portability and space are important considerations. Thanks to its efficient pulse width modulation technology, the VI-JT1-IW-B1 offers excellent power delivery at high efficiency levels.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...