BALF-NRG-01D3 RF/IF and RFID |
|
Allicdata Part #: | 497-14945-2-ND |
Manufacturer Part#: |
BALF-NRG-01D3 |
Price: | $ 0.12 |
Product Category: | RF/IF and RFID |
Manufacturer: | STMicroelectronics |
Short Description: | BALUN ULTRAMINI 5FLIPCHIP |
More Detail: | RF Balun 2.4GHz ~ 2.5GHz 50 / 50 Ohm 4-WFBGA, FCBG... |
DataSheet: | BALF-NRG-01D3 Datasheet/PDF |
Quantity: | 10000 |
5000 +: | $ 0.10414 |
10000 +: | $ 0.09696 |
25000 +: | $ 0.09193 |
50000 +: | $ 0.08978 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Frequency Range: | 2.4GHz ~ 2.5GHz |
Impedance - Unbalanced/Balanced: | 50 / 50 Ohm |
Phase Difference: | 7° |
Insertion Loss (Max): | 1.1dB |
Return Loss (Min): | -20dBm |
Package / Case: | 4-WFBGA, FCBGA |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
BALF-NRG-01D3 is an abbreviation of Balanced Low-Frequency Network Ratio Generator, and it is a type of electronic device commonly known as a Balun. In short, a Balun is an electrical device that connects an unbalanced coaxial transmission line to an balanced signal source. It can also be used to convert a balanced audio signal to an unbalanced audio signal. Baluns are designed to reduce noise from signal interference as well as increase the signal level.
Application Field
BALF-NRG-01D3 can be used in a variety of applications, such as telecommunications, consumer electronics, and broadcast systems. The main application fields for Balun are in the radio-frequency (RF) industry and the television industry. In the RF industry, Baluns are used to reduce signal reflection, crosstalk, and other noise. In the television industry, Baluns are used to improve video quality and reduce ghosting. There are also applications in audio and telecommunications as well where Baluns can reduce noise.
Working Principle
BALF-NRG-01D3 works on the principle of impedance matching. When an RF signal is transmitted over a coaxial transmission line, it encounters impedance mismatches that cause the signal to reflect back in the opposite direction as it travels down the line. This is often referred to as the “standing wave” effect, which causes a degradation in signal quality. A Balun can be used to reduce this reflection by providing an impedance match between the transmission line and the signal source.
To achieve this, Baluns use a big network of components and circuits that match the line impedance to the signal source. This network is made up of coils, capacitors, and other components that are tuned to the frequency of the transmission line. The Balun is connected to the transmission line and the signal source, and it reduces the amount of reflected energy and improves the signal quality.
Conclusion
BALF-NRG-01D3 is a type of Balun that is used to reduce noise from RF signals and improve their quality. It works on the principle of impedance matching, and it is connected to both the transmission line and the signal source. In telecommunications, consumer electronics, and broadcast systems, it is used to reduce reflection, crosstalk, and other noise. In audio and telecommunications applications, Baluns can also reduce noise. The use of Baluns in these applications is essential for achieving high-quality signal transmission and reception.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BALF-NRG-01D3 | STMicroelect... | 0.12 $ | 10000 | BALUN ULTRAMINI 5FLIPCHIP... |
BALF-NRF01E3 | STMicroelect... | 0.13 $ | 55000 | BALUN TRANSFORMER W/FILTE... |
BALF-NRF01D3 | STMicroelect... | 0.14 $ | 20000 | BALUN ULTRAMINI 5FLIPCHIP... |
BALF-CC26-05D3 | STMicroelect... | 0.09 $ | 1000 | 50 NOMINAL INPUT / CONJUG... |
BALF-SPI-01D3 | STMicroelect... | 0.12 $ | 1000 | BALUN TRANSFORMERRF Balun... |
BALF-SPI-02D3 | STMicroelect... | 0.12 $ | 1000 | IC BALUN UMINI 433MHZ 6-F... |
BALF-112X-01D3 | STMicroelect... | 0.14 $ | 1000 | BALUN 868-928MHZ 8UFBGARF... |
BALF-112X-02D3 | STMicroelect... | 0.15 $ | 1000 | BALUN 431-436MHZ 8UFBGARF... |
BALF-CC25-02D3 | STMicroelect... | 0.08 $ | 1000 | 50 / CONJUGATE MATCH TO C... |
BALF-NRF01J5 | STMicroelect... | 0.09 $ | 1000 | BALUN 2.4GHZ-2.54GHZ 5XFB... |
BALF-SPI2-02D3 | STMicroelect... | 0.11 $ | 1000 | 50 NOMINAL INPUT / CONJU... |
BALF-2690-02D3 | STMicroelect... | 0.14 $ | 1000 | IC BALUN FOR STLC2690 4FL... |
BALF-NRG-02D3 | STMicroelect... | 0.09 $ | 5000 | BALUN TO BLUENRG TRANSCEI... |
BALF-SPI2-01D3 | STMicroelect... | 0.13 $ | 5000 | NOMINAL INPUT CONJUGATE M... |
BALF-ATM-01E3 | STMicroelect... | 0.11 $ | 5000 | NOMINAL INPUT CONJUGATE M... |