RFX2401C RF/IF and RFID |
|
Allicdata Part #: | 863-1828-2-ND |
Manufacturer Part#: |
RFX2401C |
Price: | $ 0.41 |
Product Category: | RF/IF and RFID |
Manufacturer: | Skyworks Solutions Inc. |
Short Description: | IC FRONT END WLAN/ZIGBEE 16QFN |
More Detail: | RF Front End 2.4GHz ~ 2.5GHz 802.15.4, Zigbee® 16-... |
DataSheet: | RFX2401C Datasheet/PDF |
Quantity: | 35000 |
2500 +: | $ 0.36250 |
5000 +: | $ 0.34438 |
12500 +: | $ 0.33013 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
RF Type: | 802.15.4, Zigbee® |
Frequency: | 2.4GHz ~ 2.5GHz |
Features: | -- |
Package / Case: | 16-UFQFN Exposed Pad |
Supplier Device Package: | 16-QFN (3x3) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Front End is an important component in radio communication systems for signal transmission. It is responsible for the signal amplification and frequency selection bandwidth processing. The RFX2401C is a low-cost monolithic wideband amplifier. It offers high power gain, linearity, robustness and frequency selection. In this article, the working principle and application field of RFX2401C will be discussed.
Application Field of RFX2401C
The RFX2401C is a cost-effective solution for applications such as wireless LANs and high-bandwidth cellular communication systems. It is ideal for systems that require low noise and linear performance with high power gain. The device features high linearity (close to 1dB compression) and harmonic suppression, low noise and low group delay. It is also suitable for long-distance data communication (up to 4.9GHz).
Working Principle of RFX2401C
The working principle of RFX2401C is based on the integration of a 2 stage amplifier, a low pass filter, and a attenuator. The first stage of the amplifier boosts the power of the input signal before it is filtered. The filter in the second stage is used to select the desired frequency bandwidth and to ensure that the signal is free from noise and interference. Finally, the attenuator is used to decrease the gain of the amplifier in order to prevent the signal from becoming too powerful and distorting the data.
The device has two ports - the input port and the output port. The input port is used to connect the signal source, which can be either a radio frequency signal or a digital signal. The output port is then used to connect the device to the antenna and to the receiver. All of the components are connected to form a complete circuit. The device requires an external power supply and its voltage range is from 4.5V to 6V.
The RFX2401C is an excellent choice for applications that require high power, linearity and low noise. Its low power consumption, small form factor and competitive cost make it a very attractive choice for a variety of radio communication systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RFX242 | Skyworks Sol... | 0.7 $ | 2380 | RF IC AMP 2.4GHZ WLAN 16Q... |
RFX240 | Skyworks Sol... | -- | 1000 | RF IC AMP 2.4GHZ WLAN 16Q... |
RFX2401C | Skyworks Sol... | 0.41 $ | 35000 | IC FRONT END WLAN/ZIGBEE ... |
RFX2411N | Skyworks Sol... | -- | 20000 | IC FRONT END BLE/ZIGBEE 2... |
RFX2411 | Skyworks Sol... | 0.48 $ | 7500 | IC FRONT END 2.4GHZ ZIGBE... |
RFX2402E | Skyworks Sol... | -- | 10000 | IC FRONT END 2.4GHZ WLAN ... |
IC FRONT END MOD 5GHZ WLAN 16QFNRF Front...
MOD TRANSMIT FRONT END 34MCMRF Front End
IC TRANSMITTER/RECEIVER 30MCMRF Front En...
IC RF 802.11B G N2GHZ TX RXRF Front End
IC FEM 2.4GHZ BT 256 QAM 16QFNRF Front E...
MOD FEM 5G PA+LNA+SP2T 16QFNRF Front End...