Allicdata Part #: | Z3060-ND |
Manufacturer Part#: |
D6F-P0001A1 |
Price: | $ 35.83 |
Product Category: | Sensors, Transducers |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | SENSOR FLOW TYPE 0.1 LPM MICRO |
More Detail: | Air Flow Sensor 0 ~ 0.1 LPM PBT Plastic |
DataSheet: | D6F-P0001A1 Datasheet/PDF |
Quantity: | 410 |
1 +: | $ 32.57730 |
5 +: | $ 30.94560 |
10 +: | $ 28.50310 |
25 +: | $ 25.24560 |
50 +: | $ 24.43110 |
100 +: | $ 23.61680 |
Series: | D6F |
Part Status: | Active |
Sensing Range: | 0 ~ 0.1 LPM |
Flow Sensor Type: | Air |
Voltage - Input: | 4.75 V ~ 9.45 V |
Port Size: | -- |
Switch Function/Rating: | -- |
Material - Body: | PBT Plastic |
Operating Temperature: | -33°C ~ 75°C (TA) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Flow sensors are devices used to measure the flow rate or quantity of a gas or liquid moving through a pipe or tube. They are typically used in monitoring systems, such as in industrial process control, production applications, or environmental studies. The D6F-P0001A1 flow sensor is a versatile and reliable solution for many applications, and its working principle can be broken down into three key elements: transduction, conditioning, and communication.
Transduction is the process by which the physical property of interest – in this case, flow rate – is turned into an electrical signal. In the D6F-P0001A1, this is accomplished using a differential capacitance sensing element, which is basically two metal plates that measure the amount of charge in an oscillating electric field. When liquid or gas passes between the two plates, the charge is changed in relation to the rate of flow, and this change is used to measure the flow.
Conditioning involves the processing of the raw electrical signal into something more usable. This is done using a signal conditioning circuit, which modifies the signal into either a 4-to-20mA analog output or a digital Modbus RTU output. The 4-to-20mA output is used for sending simple flow level information to a PLC, while the Modbus output is used for more complex applications, such as calculating flow rate, total flow, and controlling system parameters. The flow sensor can also be configured for other standard output signals.
Communication is the process by which the output of the flow sensor is sent to the control system. This is done via either a wired connection, such as a RS485 serial port, or a wireless connection, such as a Zigbee or Bluetooth interface. The communication protocol used will depend on the system needs, but most systems use a combination of Modbus and serial communication for maximum flexibility.
The D6F-P0001A1 flow sensor is an ideal solution for many applications, and is particularly well-suited for process control, production monitoring, or environmental studies. Its robust design, combined with its simple and intuitive user interface, make it easy to configure and install. The wide range of standard output types makes it an ideal choice for today\'s modern control systems.
The specific data is subject to PDF, and the above content is for reference
MEMS FLOW AND PRESSURE MODULEGas Flow Se...
SENSOR AIRFLOW 1.0 SLPMAir Flow Sensor 1...
FLOW SWITCH--MR-W1-PFlow Sensor 1 ~ 30 L...
G5/4" WATER FLOW SENSORLiquid Flow Senso...
G1" WATER FLOW SENSORLiquid Flow Sensor ...
FLOW SENSOR MEMSGas Flow Sensor 0 ~ 2 LP...