0002062101-03-S0

Series:	1560
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Pin to Cable (Round)
Moisture Sensitivity Level (MSL):	--
Length:	3.00" (76.20mm)
Wire Gauge:	20 AWG
Contact Finish:	Tin
Color:	Slate
Contact Finish Thickness:	20.0µin (0.51µm)
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are one of the most basic and important electronic component out there. They are short pieces of insulated wire that help to make connections between two points that were not intended for that. They can be used to bridge different areas in a circuit or even to connect a component to a different circuit altogether. In general, they are used to supply current or signals between two points. Jumper wire have standard colors that designate certain voltage levels. They come in various types such as insulated jumper wires, crimp-able leads, uninsulated twisted cables, and much more. The core of jumper wires is made of metal wire material such as copper, which is then covered by an insulation material such as plastic. The insulation material acts as a barrier to prevent electricity from jumping from one point to the other. They come in a variety of sizes and colors to suit different applications. They are also available in various shapes and lengths which make them perfect for a variety of projects.

Pre-crimped Leads

Pre-crimped leads are another type of jumper wire. These are made of insulated wire with a pre-crimped end that is sealed with a protective coating. Pre-crimped leads are used in high-density electronic assemblies such as printed circuit boards. They help to save time and money in the production of circuit boards. The ends of the wires are crimped to improve the contact between the wire and the hole. The other end of the wire is sealed with a protective coating that helps to protect it from corrosion and electrical shorts. Pre-crimped leads are used to reduce the amount of wiring required to complete a circuit. They can be used to connect components to each other and to circuit boards. Pre-crimped leads are available in many different colors to indicate the type of wire used and can be made to custom lengths for specific applications.

0002062101-03-S0 application field and working principle

0002062101-03-S0 is an application field and working principle for jumper wires and pre-crimped leads. It is a standard developed by the IEC (International Electrotechnical Commission) and it sets the rules for all applications involving jumper wires and pre-crimped leads. The standard contains requirements and properties for the suitability and reliability of the wires and leads, as well as their installation and testing requirements.To comply with the 0002062101-03-S0 standard, jumper wires and pre-crimped leads must meet certain requirements. Jumper wires must be made of the correct material and must be of sufficient length for the application. Pre-crimped leads must be made of insulated material with a minimum insulation resistance of 500 Megaohms per cm and must be crimped to an appropriate diameter of wire. All components must be inspected and tested for electrical performance before installation.In conclusion, jumper wires and pre-crimped leads are essential components in any electronic application. They are used to connect components and electrical circuits and must adhere to the 0002062101-03-S0 standard to ensure that they are safe and reliable. Jumper wires are available in a variety of shapes and sizes while pre-crimped leads are designed to offer increased reliability in high-density applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description