Allicdata Part #: | 0011405225-ND |
Manufacturer Part#: |
0011405225 |
Price: | $ 61.75 |
Product Category: | Tools |
Manufacturer: | Molex, LLC |
Short Description: | TERMINAL SPRING |
More Detail: | N/A |
DataSheet: | 0011405225 Datasheet/PDF |
Quantity: | 1000 |
2 +: | $ 56.13300 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crimpers, Applicators, Presses - Accessories (0011405225) are essential components in industries as they provide the precision and repeatability necessary to assemble wires in a way that can be used reliably for many years. Crimpers, Applicators, and Presses - Accessories work by applying a specific amount of force to a fastener in order to create a specific amount of mechanical pressure. This pressure is applied in order to create a seal which will secure the two parts of a circuit together. The force applied can be adjusted to create different types of seals.
The main working principle of Crimpers, Applicators, and Presses - Accessories can be classified into four main categories: Electrical Crimpers, Pneumatic Crimpers, Hydraulic Crimpers, and Mechanical Crimpers. Each of these has its own unique set of advantages and disadvantages. The type of crimper used will usually depend on the specific application and the components being connected.
The electrical crimping process works by sending an electric current through the wire to be crimped. This causes the metal on the wire to become electrically charged which creates friction which then bonds the wire to the connector. This process is fast, reliable, and relatively inexpensive. However, because electricity is used, there is potential for damage to the components if the electric current is too high.
The pneumatic crimping process involves pressurizing an air compressor to create a consistent amount of force on the wire. This force is then used to collapse the sides of the connector onto the wire, creating the required seal. This method is often less costly than electric crimping, however, it is a bit slow and requires a skilled operator.
The hydraulic crimping process relies on hydraulic pressure in order to bond the two parts of a circuit. This is done by using a hydraulic press to apply a continuous and precise amount of pressure. This method is much faster than electric and pneumatic crimpers and is more reliable as well. However, since hydraulic pressure is used, there is a risk of component damage due to the pressure applied.
Finally, the mechanical crimping process uses a special tool called a crimping pliers. This tool is used to crimp the terminals to the wire. This process is slower than the other two processes but is preferred in applications that require a more precise and secure connection. Additionally, this process is also less expensive than the two other methods.
Crimpers, Applicators, and Presses - Accessories provide essential components to many industries and the working principle is essential in determining the appropriate method for a given application. Electrical, pneumatic, hydraulic, and mechanical crimping are all important tools which allow for precision and repeatability in connection creation. By understanding the working principle of each of these methods, industries can ensure that the components are securely connected and functioning properly for many years.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
1050017:0011 | Phoenix Cont... | 1.65 $ | 603 | CONN ACC MARKER STRIP PRE... |
1051016:0011 | Phoenix Cont... | 1.65 $ | 597 | CONN ACC MARKER STRIP PRE... |
0804293:0011 | Phoenix Cont... | 4.54 $ | 135 | MARKER CARD PRINTED 11-20... |
1050020:0011 | Phoenix Cont... | 1.58 $ | 164 | ZACK STRIP 10-SECTION WHI... |
1051029:0011 | Phoenix Cont... | 1.65 $ | 99 | ZACK STRIP 10-SECTION WHI... |
0804109:0011 | Phoenix Cont... | 8.63 $ | 76 | ADHESIVE MARKER CARD 11-2... |
0809803:0011 | Phoenix Cont... | 1.64 $ | 98 | ZACK STRIP 10-SECTION WHI... |
0808671:0011 | Phoenix Cont... | 1.65 $ | 63 | ZACK STRIP 10-SECTION WHI... |
1052015:0011 | Phoenix Cont... | 2.51 $ | 1000 | CONN ACC MARKER STRIP PRE... |
0808626:0011 | Phoenix Cont... | 2.51 $ | 4 | ZACK STRIP 10-SECTION WHI... |
1401802:0011 | Phoenix Cont... | 2.52 $ | 79 | BNB ZACK STRIP 10-SECTION... |
1053014:0011 | Phoenix Cont... | 2.55 $ | 77 | CONN ACC MARKER STRIP PRE... |
1052028:0011 | Phoenix Cont... | 2.55 $ | 72 | ZACK STRIP 10-SECTION WHI... |
0801404:0011 | Phoenix Cont... | 2.6 $ | 57 | TERM BLOCK MARKERConnecto... |
0801406:0011 | Phoenix Cont... | 2.6 $ | 29 | TERM BLOCK MARKERConnecto... |
0804183:0011 | Phoenix Cont... | 4.86 $ | 73 | MARKER CARD PRINTED 11-20... |
0804073:0011 | Phoenix Cont... | 8.63 $ | 55 | ADHESIVE MARKER CARD 11-2... |
0803582:0011 | Phoenix Cont... | 17.26 $ | 13 | ZACK STRIP FLAT 100-SECTI... |
0808749:0011 | Phoenix Cont... | 1.57 $ | 25 | ZACK STRIP 10-SECTION WHI... |
0808765:0011 | Phoenix Cont... | 1.65 $ | 20 | ZACK STRIP 10-SECTION WHI... |
0808697:0011 | Phoenix Cont... | 1.65 $ | 1000 | ZACK STRIP 10-SECTION WHI... |
0805739:0011 | Phoenix Cont... | 2.47 $ | 24 | ZACK STRIP 10-SECTION WHI... |
0808804:0011 | Phoenix Cont... | 2.51 $ | 14 | ZACK STRIP 10-SECTION WHI... |
0803479:0011 | Phoenix Cont... | 2.51 $ | 13 | ZACK MARKER STRIP 11-20Co... |
0803480:0011 | Phoenix Cont... | 2.51 $ | 25 | ZACK MARKER STRIP 11-20Co... |
1401828:0011 | Phoenix Cont... | 2.52 $ | 20 | BNB ZACK STRIP 10-SECTION... |
55246-0011 | Molex, LLC | 0.0 $ | 1000 | CONN COMPACT FLASH CARD S... |
310-87-160-41-001101 | Preci-Dip | 2.03 $ | 264 | SOCKET 4.2 MM SOLDER TAIL... |
803-87-040-10-001101 | Preci-Dip | 2.05 $ | 1300 | SOCKET 7 MM SOLDER TAIL D... |
801-87-040-10-001101 | Preci-Dip | 2.05 $ | 821 | SOCKET 7 MM SOLDER TAIL S... |
851-87-025-10-001101 | Preci-Dip | 2.14 $ | 474 | SOCKET SOLDER TAIL SINGLE... |
310-87-164-41-001101 | Preci-Dip | 2.16 $ | 641 | SOCKET 4.2 MM SOLDER TAIL... |
315-87-164-41-001101 | Preci-Dip | 2.29 $ | 552 | PCB SKT LOW PRO SINGLE RO... |
831-87-050-10-001101 | Preci-Dip | 2.3 $ | 758 | SOCKET 4.2 MM SOLDER TAIL... |
803-87-050-10-001101 | Preci-Dip | 2.56 $ | 209 | SOCKET 7 MM SOLDER TAIL D... |
801-83-050-10-001101 | Preci-Dip | 3.97 $ | 906 | PCB CONN SOLDER TAIL50 Po... |
323-87-164-41-001101 | Preci-Dip | 4.19 $ | 400 | WW SCKT 4.9MM 3LEVEL SING... |
851-87-050-10-001101 | Preci-Dip | 4.28 $ | 445 | SOCKET SOLDER TAIL SINGLE... |
803-87-100-10-001101 | Preci-Dip | 4.65 $ | 1040 | SOCKET 7 MM SOLDER TAIL D... |
861-87-050-10-001101 | Preci-Dip | 5.4 $ | 367 | PCB CONN SOLDER TAIL 1MM5... |
RETAINER PLATE/STRIP CUTOFF
GAGE PIN ASSEMBLY
LOCATOR MINI EJECTOR
MEP-6T TOUCH SCREEN/MESSAGE SYST
SEATING TI ASSEMBLY
INSET TL ASSY 5 PR 14 COLUMN