0315010.VXP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are protective devices used to prevent an overload or short circuit in any electric circuit, but what is 0315010.VXP and how is it used? In this article, we will take a look at the 0315010.VXP application field and working principle to better understand what it is and how it is used.

0315010.VXP is a 330VAC fast-acting 1.625 x 0.875 inch (41.3mm x 22.2mm) radial leaded fuse with a current rating of 10A. It is a non-rejection flow-through fuse, meaning that both ends of the fuse are open for the current to flow through, and the contacts are lower value resistors than the current rating. The fuse element is a cylindrical tube with a disc at one end, which is the fuse’s heat signature.

The purpose of the 0315010.VXP is to protect electronic devices from electrical overcurrent conditions. It provides a short circuit protection by blowing open in the event of an overload. This prevents the current from reaching the device or part of the circuit that is being protected, thus preventing damage to the device or the wiring.

The 0315010.VXP has a wide range of applications. It is used in the home and office to protect against surges and other disturbances, as well as industrial settings, such as power plants. It is also used to protect transformers, motors, generators, and other applications from damaging overloads.

The working principle of the 0315010.VXP is relatively simple. When an overcurrent passes through the fuse, it heats the fuse element, which causes the disc to melt and open the circuit. The fuse will then be able to safely cut off electricity to the device or circuit it is protecting.

The 0315010.VXP also has a thermal rating, which is the temperature that it needs to reach in order to blow open. This is typically lower than the rated current, as the fuse can be used to protect devices from localized and momentary overloads. In general, the thermal rating of the fuse should be set at least 20 to 30% lower than the device’s rated current.

It is important to note that a fuse should only be used to protect against overloads. Short circuits, reverse currents, and high-frequency transients should not be protected by a fuse. Additionally, the fuse should not be used in applications where the current will be changing rapidly, as this could cause the fuse to blow prematurely.

In sum, the 0315010.VXP is a 330VAC fast-acting 1.625 x 0.875 inch (41.3mm x 22.2mm) radial leaded non-rejection flow-through fuse with a current rating of 10A. It is primarily used to protect electronic devices from overloads and is typically set at a thermal rating 20 to 30% lower than the device’s rated current. It can be used in home, office, and industrial applications.

The specific data is subject to PDF, and the above content is for reference