0430300003-10-N0-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires and Pre-Crimped Leads are essential components in any Electronics project. While jumper wires are used for purposes such as connecting two components on a breadboard, and are available in different lengths and colors; Pre-Crimped harnesses provide a convenient and reliable way to construct a permanent connection between two components, and are usually sold pre-assembled with a backshell or other connector that serves as a strain relief.

The 0430300003-10-N0-D is a Jumper Wire and Pre-Crimped Lead components that provides a crimp type connection to a mating device such as a socket or terminal block. The product features 10-30 AWG stranded wire and metal overmold housings. The wire leads provide a mechanical connection between the connector and the mating connector, and they also provide a reliable electrical connection as the wires are heat sealed and crimped onto the contact walls.

The 0430300003-10-N0-D can be used for a variety of applications, and it is especially suitable for connecting two different components, such as two pieces of electronic equipment or wires in an audio system. In addition, the product is also used to connect a power source to an electrical device, or to bridge a gap in an electrical circuit in order to complete the circuit. It is also often used to extend the length of a wire in order to connect two components that are too far apart to be directly connected.

The working principle of the 0430300003-10-N0-D is relatively straightforward. The product consists of a plastic housing with two metal contacts, which are connected to the 10-30 AWG stranded wire, and a backshell piece. The backshell piece is crimped onto the plastic housing, which secure the wires and ensure they remain solidly attached. The contacts are also crimped onto the wire and it is these contacts which provide the electrical connection when connected to the mating device. Once the contacts are connected and the electrical connection is established, the backshell provides a strain relief.

In conclusion, the 0430300003-10-N0-D is a jumper wire and pre-crimped lead components that provides a crimp type connection to a mating device. It is commonly used for applications such as connecting two electronic components, connecting a power source to an electrical device, and extending the length of a wire. The product consists of a plastic housing with two metal contacts, which are connected to the 10-30 AWG stranded wire and a backshell piece, which ultimately provides a strain relief.

The specific data is subject to PDF, and the above content is for reference