0430310002-03-Y4-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires (also known as jumper cables or just jumpers) are a type of electrical wire that is commonly used to connect two electronic components together in order to create a circuit. The typical jumper wire is composed of two or more insulated conductors that are held together by a plastic connector. The introduction of jumpers in the early 1950s revolutionized the way circuits could be laid out and constructed. By being able to easily connect two or more components without having to physically wire them together, engineers were able to reduce time and cost associated with laying out complex circuits.

Pre-Crimped Leads

Pre-crimped leads, also known as pre-wired leads, are electrical leads that have one or more electrical wires pre-crimped into them. This allows for a much simpler and faster way to connect two electronic components than the traditional method of soldering. Pre-crimped leads are most commonly used in the construction of circuit boards, but they can also be used for a variety of other purposes. Pre-crimped leads make connecting multiple electrical components much faster and easier, especially in large projects where there are many individual connections to make. They also make it much easier to replace components if needed, since the entire lead can simply be pulled out and replaced.

0430310002-03-Y4-D Application Field and Working Principle

The 0430310002-03-Y4-D is a type of jumper wire commonly used in applications such as signal loss detection and computer hardware connections. The working principle of the 0430310002-03-Y4-D is based on the concept of electrical resistance. As two points are connected and current flows through the wire, the resistance of the wire between the two points increases. This increased resistance creates an electrical feedback loop in which the signal is weakened as it passes through the wire, allowing for signal loss detection. In terms of connecting computer hardware, the 0430310002-03-Y4-D jumper wire is typically used to connect a processor to its RAM and/or disk drive. In this application, the signal travels through the resistance of the wire, allowing power to be delivered to the components and/or data to be transferred.

The specific data is subject to PDF, and the above content is for reference